Loads of good stuff

[StuartWags]

Please look at the photos on the web
http://s1313.photobucket.com/user/Stuar ... t=3&page=1
I am subject to offers on prices but there are not mate rates or first dibs.



Bag of hoses = £5 + £5 P&P.
Belly pan = £40 + £15 P&P. A bit burnt by exhaust and a few scrapes. One braket missing although i did not notice until i removed it.
Carbon filer cap cover, yoke cover and clock cover, tax disk holder = £7 + £3 P&P.
Set of carbs = £50 + £10 P&P. Clean, not off a high miles bike.
Harris clip ons and bar ends = £70 + £10 P&P. Have receipts for these, but been used (brought 09/09/13).
4 main engin bolts = £10 + £4 P&P.
Fork top nuts = £5 + £3 P&P.
Carbon Fibre front mugaurd extendor and carbon fibre hugger £60 + £15 P&P
Combined LED rear light and indicators = £35 + £5 P&P - with wiring guide
Left pillion hanger = £10 + £5 P&P
Mini indicators = £4 + £3 P&P - need wires soldering
HISS ECU £20 + £4 P&P - I belive these can be "reset" to match a new key
Pro bolt - Screen set etched,tyre duct caps, clips for braided hoses, clutch and brake lever adjuster, clutch filer cap retention clip, some other bolts (all gold coloured) £15 + £3 P&P.
Harris Rear Sets = £150 + £10 P&P - one hero scrape on brake lever SOLD
Silver bar ends (ali i think), clutch and brake cylinder cap (billet), oil filler cap (billet), brake nipple covers (ali), steering top nut (stainless) and a LED side light bulb £35 + £5 P&P
Swing arm - chain braket missing - £10 + £15 P&P
Swing are plugs £3 + £2 P&P
Thremostat and pips £8 + £5 P&P
Top and bottom Yoke £25 + £10 P&P
Top yoke £20 + £5 P&P
Tyres, Metz racetec k2 rear, used on road for 30 miles, Metz racetec k1 front, used on track but lots of life left, super corsa front scrubbed £120 + pick only
Undertray and cut standard tray £50 + £15 P&P
White Power Adjustable shock £200 + £15 P&P

Any questions please ask. Feel free haggle on price. I thought i would give the parts ago here before i throw them on ebay

[gabi81]

what type of belly pan is it ?
the standard one?
any pics

[chric]

Bar enfs what they do normal ones dont do.
And would i get white finger from them
and what where they new

[StuartWags]

what type of belly pan is it ?
the standard one?
any pics

there are pictures in the photobucket link... i will try to tidy them later

[StuartWags]

I have tried to make the photos easier to find by putting links next to the item. Click the link to view the photos, then click on the image or slideshow icon to see full size.

I will be listing on ebay shortly but please buy here as ebay and and paypal on average cost me 22%... Hence, i will consider offers on the items.
I still have many odds and sods kicking about that i have not listed as well.



Bag of hoses = £5 + £5 P&P. Various cooling hoses and tank breathers ectc.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Belly pan = £40 + £15 P&P. A bit burnt by exhaust and a few scrapes. One braket missing although i did not notice until i removed it.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Carbon filer cap cover, yoke cover and clock cover, tax disk holder = £7 + £3 P&P. These will need new glue globs to refit
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Set of carbs = £50 + £10 P&P. Clean, not off a high miles bike.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Harris clip ons and bar ends = £70 + £10 P&P. Have receipts for these, but been used (brought 09/09/13 for £131.40).
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

4 main engin bolts = £10 + £4 P&P. I have others that i can chuck in free of charge.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Fork top nuts = £5 + £3 P&P. Not rounded off but can see where the socket was used.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Carbon Fibre front mugaurd extendor and carbon fibre hugger £60 + £15 P&P. The hugger has been degreessed, the extender comes with screws. The hugger has a few age related wear marks but is generally very good.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Combined LED rear light and indicators = £35 + £5 P&P - the wires have been marked so they can be easily spliced into the loom. This also comes with a cooling fan kit for the voltage regulator / rectifire
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Left pillion hanger = £10 + £5 P&P. Clean and straight.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Mini indicators = £4 + £3 P&P - These will need some wires soldering back on.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

HISS ECU £20 + £4 P&P - These came off a 7500 mile 05 bike that had and attemped theft. I belive these can be "reset" to match a new key. Correct me if i am wrong.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Pro bolt Screen set - etched, tyre dust caps, 3 clips + screws for braided hoses, clutch and brake lever adjuster, clutch filer cap retention clip, some other bolts £10 + £3 P&P. All in gold coolerd alloy. Used but have recepts (20/05/13).
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Harris Rear Sets = £150 + £10 P&P - SOLD
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Silver bar ends (billet), clutch and brake cylinder cap (billet), oil filler cap (billet), brake
nipple covers, steering top nut and a LED side light bulb £35 + £5 P&P - mainly Probolt with recepts.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Swing arm - chain braket missing - £10 + £15 P&P. Idea for project bike.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Swing are plugs £3 + £2 P&P. I have a few more as well.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Thremostat and pips £8 + £5 P&P.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Top and bottom Yoke £25 + £10 P&P. Staight and good conition with nuts. I would discard the tapper bearings.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Top yoke £20 + £5 P&P. Stiaght and clean has a fews dinks here and there.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Tyres, Metz racetec k2 rear, used on road for 30 miles (recept from 10/09/13)- not heat cycled, Metz racetec k1 front, used on track but lots of life left, super corsa front scrubbed £120 + pick only - I am open to offers here .
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Undertray and cut standard tray £50 + £15 P&P. This includes a modified standard undertray. This means you can keep or sell your standard one (Sell on ebay for upto £45).
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

White Power Adjustable shock £200 + £15 P&P This is in good condition and has been used on the track. Fits straight in with no modding of linkages.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

Shock hanger £3 + £3 P&P. Clean.
http://s1313.photobucket.com/user/Stuar ... t=3&page=1

[StuartWags]

Bar enfs what they do normal ones dont do.
And would i get white finger from them
and what where they new

I have know idea mate. About £10 for Oberon and £18 for Probolt.

I think of bar ends as a bit like bell ends..... it is lump at the end of the shaft that stops your hand slipping off

oops can I say that here?

[Wicky]

The best bar ends for dampening vibration are made of depleted uranium as its 60% more dense than lead.

[chric]

Sorry meant to say harris bars

[Ckennedy]

You would post all these goodies up now so much on there I want but can not afford yet

Best of luck with the sale

[StuartWags]

Still got bits left. I need to shift these cos i got soaked on the way to Leicester today (didn't make as far a Coalville for the toy run unfortunately), my gloves are F@cked, my helmet is sh!te and it is going a lot of work to get the cr@p of the bike. And I think my bone marrow is still frozen in places.

I have revised the priceson some things and will still be open to offers on any of the bits. I may also spilt multiple items, where i have bulked them together. Pictures can be found through the previous posts or ask me.


Bag of hoses = £5 + £5 P&P. Various cooling hoses and tank breathers ectc.

Harris clip ons and bar ends = £50 + £10 P&P. Have receipts for these, but been used (brought 09/09/13 for £131.40).

Left pillion hanger = £10 + £5 P&P. Clean and straight.

Mini indicators = £4 + £3 P&P - These will need some wires soldering back on.

HISS ECU £20 + £4 P&P - These came off a 7500 mile 05 bike that had and attemped theft. I belive these can be "reset" to match a new key. Correct me if i am wrong.

Pro bolt Screen set - etched, tyre dust caps, 3 clips + screws for braided hoses, clutch and brake lever adjuster, clutch filer cap retention clip, some other bolts £10 + £3 P&P. All in gold coolerd alloy. Used but have recepts (20/05/13).

Silver bar ends (billet), clutch and brake cylinder cap (billet), oil filler cap (billet), brake
nipple covers, steering top nut and a LED side light bulb £35 + £5 P&P - mainly Probolt with recepts.

Swing arm - chain braket missing - £10 + £15 P&P. Idea for project bike.

Thremostat and pips £8 + £5 P&P.

Top and bottom Yoke £25 + £10 P&P. Staight and good conition with nuts. I would discard the tapper bearings.

Top yoke £20 + £5 P&P. Stiaght and clean has a fews dinks here and there.

Tyres, Metz racetec k2 rear, used on road for 30 miles (recept from 10/09/13)- not heat cycled, Metz racetec k1 front, used on track but lots of life left, super corsa front scrubbed £90 + pick only - I am open to offers here .

White Power Adjustable shock £200 + £15 P&P This is in good condition and has been used on the track. Fits straight in with no modding of linkages.

Shock hanger £3 + £3 P&P. Clean.

[bigtwinthing]

Will the WP shock fit my later model 2001 storm?, if so i could run to £150 plus postage? I can't do more as Roger is getting my forks to do

Regards Paul.