Hello

Watty · Post by **Watty** » Thu Dec 26, 2013 9:47 pm

Looks clean enough mate, nice one

Bertiew · Post by **Bertiew** » Fri Dec 27, 2013 2:51 am

Thanks for the advice. Keep it coming as I'd rather be knowledgeable before I pick it up. Also can you tell if the ccts are auto without taking bits off, and where are the rr's on these?

Thanks again Bertie

Virt · Post by **Virt** » Fri Dec 27, 2013 8:55 am

RR's are on the right side of the sub-frame.

You can see the rear CCT on the rear right of the engine protruding out, if it doesn't have a thread with nuts on it then it's an Auto. I'll take a photo of mine in a second to show you, if no one beats me to it

Sent from my GT-I9505 using Tapatalk

lloydie · Post by **lloydie** » Fri Dec 27, 2013 9:03 am

This is your standard cct you should either do the stopper mod or fit a manual .

Kev L · Post by **Kev L** » Fri Dec 27, 2013 9:18 am

Lloydies picture shows you where to look and the shape you are looking for, however the rear brake hose obscures the end of the cct. There is a mystical Essex elf with a rusty head who converts the stock CCT's to manual. So if it looks like the pic but has a lump of threaded bar hanging out of it you may still be ok.

Virt · Post by **Virt** » Fri Dec 27, 2013 10:13 am

As lloydie has already posted a picture of where, I shall do the picture of what. I was gonna go outside and take a picture but my Mum took the keys to the flat to work with her, so if I go out then I'm stuck out until 7pm

Standard Honda Auto's :

There are several types of Manual CCTs available for the VTR. As an example :

Jamoi · Post by **Jamoi** » Fri Dec 27, 2013 11:46 am

Oi those are mine, on my worktop! ^^

Kev L wrote:There is a mystical Essex elf with a rusty head who converts the stock CCT's to manual.

Kev L · Post by **Kev L** » Fri Dec 27, 2013 12:07 pm

Hopefully he won't be on for a while and I'll get away with it!!!!

Bertiew · Post by **Bertiew** » Fri Dec 27, 2013 1:17 pm

Nice one thanks a lot for the info. How long as how har is it to change them to manual ones?

macdee · Post by **macdee** » Fri Dec 27, 2013 1:32 pm

Bertiew wrote:Nice one thanks a lot for the info. How long as how har is it to change them to manual ones?

have a read at carls awsome

thread
http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=28583

lumpyv · Post by **lumpyv** » Fri Dec 27, 2013 2:08 pm

[quote="Jamoi"]Oi those are mine, on my worktop! ^^

is the worktop where the punishment takes place ??

Jamoi · Post by **Jamoi** » Fri Dec 27, 2013 2:37 pm

lumpyv wrote:
Jamoi wrote:Oi those are mine, on my worktop! ^^

is the worktop where the punishment takes place ??

Many unspeakable atrocities have taken place on that worktop, some of which would reduce fully grown men to tears

Virt · Post by **Virt** » Fri Dec 27, 2013 2:38 pm

Jamoi wrote:
Many unspeakable atrocities have taken place on that worktop, some of which would reduce fully grown men to tears

Like placing a picture of that lovely pink bike you used to have

Jamoi · Post by **Jamoi** » Fri Dec 27, 2013 3:01 pm

Hey now! You leave betsy alone

VTR1000.ORG

Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello

Re: Hello