what have you done to your "bike" today

[Virt]

I don't even know what that means.

[MacV2]

Nothing yet been at work but I might go out in the MacCave a bit later for a fondle of my small chipolata...

Quite easy this manipulating other folks posts innit Mac?

Nowt wrong with that Kev I'll be fondling me willy whilst fondling the Red goodness that's nestling in the MacCave...

[lloydie]

Made plates up to relocate the standard pillion pegs as the after market hangers I have are to flimsy for my liking .
Now they will be strong and the exhaust angle be a little sharper too .

Also fitted it's new 8x6" number plate and I started to open the cans for repacking .
One was easy but the other is now soaking in wd over night as it won't separate .

[lloydie]

@mac congrats on new red

[Virt]

Spanked it from Colchester to Bristol. Well, apart from the M25 where it was filtering through traffic for almost an hour

Knackering sh1t right there

Sent from my GT-I9505 using Tapatalk

[lloydie]

Fitted s/s front exhaust studs .
Finished stripping the viper cans then gave them a sanding down then a polish .
Sorted the garage out again now I'm waiting for more parts before anything else can be done .

[AMCQ46]

went for a mountain bike ride in Wye forest, then got my trials bike ready for a new yrs eve trial.

the firestorm is being ignored at the moment, but come spring it will get a good thrashing

[bigtwinthing]

Washed it and waxed the chain ready for some dry, non blowy weather tomorrow then out for a blast, followed by removing the forks for Roger to do the fork re-form, Yahoo

[tony.mon]

Sprayed the SP1 front wheel, test fitted the Woodcraft clip ons, shoved a bit more glass fibre in the airbox I'm making, stripped the old clip ons and remembered that I'll need to order new twist grip and LH clip on rubbers, and drill holes in the bars for the switchgear.
And gave up getting a pair of USD forks apart, so bought a lovely new pair of stanchions c/w lower castings for the Blade conversions I'm still in the middle of.....£138. Not too bad, I thought they'd be 2nd hand so was well pleased to discover they were new, still in Honda packaging and came with new slider bushes, seals and dust caps Me nice new vented carbon mudguard will go well with those.

[Jamoi]

Today I are mostly be, freezin my pinkies off!

Made some hangers for my zorsts (temp) which steepen the angle up nicely



And test fitted undertray, now I gotta rub it down and spray it black.

Had a good chat with Wicky, now I understand what a relay is and have a good idea of what I'll need to order from Eastern beaver when I have the money.

I might fit the tank and front fairing and go for a ride tomorrow

Might do a little man wee!

[bigtwinthing]

How did you get them cans ( look sh1t hot by the way) at that angle? did you cut the original zorst mounting lugs off?

[Jamoi]

Thank man

I just made some hangers which are a bit shorter than the standard ones with footpegs. Then the exhaust and link pipe swivel on the connection to the headers.

Easy peasy! Just gotta have shorter hangers

[Jamoi]

Oh and I polished and fitted those headers up, Mr Mac..

[Kev L]

Looking good Jamie. I like the angle you've put on the pipes. Did Wicky tell you that the relay was an Olympic event? If so he may be lying to you!!!!!

[Jamoi]

Yeah he said some stuff about passing batons and running...

I just smiled and nodded, think I've got it now though