About 2 weeks ago I posted the question does any one know how to fit goodridge front brake hoses and every one said just play about until you get them to fit, Well this is what goodridge say
LH Hose should be 754mm from the centre of each banjo bolts and has 1 straight banjo and 1 20 degree angled banjo bolt
RH Hose should be 710mm from the centre of each banjo bolts and has 2 20 degree angled banjo bolts
1, Remove the original hoses from the machine
2, Fit the Goodridge hoses to the machine with the RH hose on the inside of the master cylinder and the angled banjo facing to the right ( away from the clocks )
3, Bleed the brake system
Goodridge Brake Lines
-
lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Goodridge Brake Lines
Good info and will save the next one a lot of time faffing about 
Re: Goodridge Brake Lines
That is very helpful, cheers for posting that up carmanbikes
Chris.
Chris.