what have you done to your "bike" today
- Tam Cunningham
- Posts: 129
- Joined: Thu Dec 26, 2013 10:47 pm
- Location: Perth, Scotland. thomaspcunningham@btinternet.com
Re: what have you done to your "bike" today
Actually yesterday but couldn't get to my laptop.......
Used my Autosol and Belgom ALU to polish up the twin devil end cans, the shiny bits anyway as they are carbon. What an awesome shine from them both.
The Belgom makes a great difference to the finish and it's almost mirrored. Thinking about one on these for the wheels and the frame polishing:
http://www.ebay.co.uk/itm/390637390106? ... 923wt_3811
Used my Autosol and Belgom ALU to polish up the twin devil end cans, the shiny bits anyway as they are carbon. What an awesome shine from them both.
The Belgom makes a great difference to the finish and it's almost mirrored. Thinking about one on these for the wheels and the frame polishing:
http://www.ebay.co.uk/itm/390637390106? ... 923wt_3811
Re: what have you done to your "bike" today
IMO that's a bit lightweight for wheels and frame. You would go through so many sanding discs it's not funny.
(:-})

(:-})
==============================Enter the Darkside
- Tam Cunningham
- Posts: 129
- Joined: Thu Dec 26, 2013 10:47 pm
- Location: Perth, Scotland. thomaspcunningham@btinternet.com
Re: what have you done to your "bike" today
The frame is already polished up I just need to keep on top of it. The wheels however are slightly pitted and dull so may well need a bit more work and sweat involved.
Will see how it goes as may still even get them powder coated white yet, I don't know.
Will see how it goes as may still even get them powder coated white yet, I don't know.
Re: what have you done to your "bike" today
+1, I don't know either.Tam Cunningham wrote:The frame is already polished up I just need to keep on top of it. The wheels however are slightly pitted and dull so may well need a bit more work and sweat involved.
Will see how it goes as may still even get them powder coated white yet, I don't know.
Sweaty pits are certainly a factor.
It's not falling off, it's an upgrade opportunity.
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: what have you done to your "bike" today
Got the newly "Rogered" forks back on and its looking good, only the WP shock to do.
missing the noise, not the vibes. However never say never!
Re: what have you done to your "bike" today
Nothing to the bike itself, but I now am blessed with power in the garage, so I knocked together a work bench. Needs finishing properly, but enough for today. Included a little message especially for a Mr Kev L.




" It was 2 minutes 5 minutes ago "
Re: what have you done to your "bike" today



Slowly approaching the more bikes than birthdays achievement
Re: what have you done to your "bike" today
Do you need some files Lee
Upmarket garage now you have electric.
(:-})


(:-})
==============================Enter the Darkside
Re: what have you done to your "bike" today
It still bloody leaks so not that upmarket. That will get addressed when the weather sorts itself out. ( not as bad as it used to mind )cybercarl wrote:Do you need some files LeeUpmarket garage now you have electric.
![]()
(:-})
" It was 2 minutes 5 minutes ago "
Re: what have you done to your "bike" today
cybercarl wrote:Do you need some files Lee
Must be new style stubby ones.![]()
(:-})
"It may be yellow but it ain't no chicken"
Re: what have you done to your "bike" today
Back wall of filling cabinets!!
(:-})
(:-})
==============================Enter the Darkside
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: what have you done to your "bike" today
I bet you googled how to spell unnecessary.....




HEY YOU GUYS!!!!!!
Re: what have you done to your "bike" today
You mean it was necessary to google unnecessary.
(:-})

(:-})
==============================Enter the Darkside
Re: what have you done to your "bike" today
Nice bit of tool organising there lee...no OCD tendencies there at all 

AMcQ