Essex workshop day - Colchester - Sat 26th April 2014

[VTRDark]

Nah we will be OK, weather forecast is not always precise.

(:-})

[bazza696]

It will be sunny with out breaks of snow, we will be fine...

[lloydie]

Rain or shine I'll be there !
Be interesting if it's wet with my tyres tho !!!

[lumpyv]

so long as its drier than storming Honda,s event

[VTRDark]

Can we have a list of who's doing what to their bikes please? I need to know what tools may be needed to bring along. Jamie are still intending doing your forks. Shall I bring my fork oil level syringe? and do you have a long hex (allen) socket for the bottom of the fork leg?

(:-})

[bazza696]

does anyone need cct's doing, I have a couple of spare sets that I can bring if you bring monies.

[Jamoi]

Nice one chaps

I have got a great biking buddy, not only has he offered to help with tea/coffee he has also offered the use of his giant gazebo/marquee!

Carl, I am going to leave the fork bushes for now, but can you bring your oil level syringe please? I'd like to do the following:

1- check fork oil air gap

2- balance carbs

[agentpineapple]

come on weather, we need you to speed up a bit, so sundays weather becomes Saturdays weather. i'm hoping we stay dry, Jamie is it possible for your my to be our brolly dolly.....
not planning any work as such......

[magnum]

so long as its drier than storming Honda,s event

Do you still want to meet up in Ipswich Mr lumpy.
Haven't heard from dom dom he was meeting me at needham at 9ish so 9. 30 ish in ipy Plenty time to take in some Suffolk twistys on way

[lumpyv]

so long as its drier than storming Honda,s event

Do you still want to meet up in Ipswich Mr lumpy.
Haven't heard from dom dom he was meeting me at needham at 9ish so 9. 30 ish in ipy Plenty time to take in some Suffolk twistys on way

hello boss , well we have got meet up somewhere haven't we but I don't mind where? perhaps dom dom will read this and we can do needham or ips if he dosent?

cheers

[lumpyv]

Can we have a list of who's doing what to their bikes please? I need to know what tools may be needed to bring along. Jamie are still intending doing your forks. Shall I bring my fork oil level syringe? and do you have a long hex (allen) socket for the bottom of the fork leg?

(:-})

may have a bash at my clutch line and rear brake line, ive got the bits and a syringe or 3.

[magnum]

so long as its drier than storming Honda,s event

Do you still want to meet up in Ipswich Mr lumpy.
Haven't heard from dom dom he was meeting me at needham at 9ish so 9. 30 ish in ipy Plenty time to take in some Suffolk twistys on way

hello boss , well we have got meet up somewhere haven't we but I don't mind where? perhaps dom dom will read this and we can do needham or ips if he dosent?

cheers

Will give you a shout Friday night mate will fill up at beconhill any way don't no if you have my number so i'll PM it.

[VTRDark]

Not sure where the 3 will work but bring that along too I shall bring the cafeter.

Anyone else want to add what they have planed to do?

So far I'm bringing as follows:
Cafeter bag
Fork level syringe
Gasket seal as it always comes in handy
Carbtune
Security Torx
Multimeter

(:-})

[magnum]

Carb balance if I got the right bits I also have another idea gadget to balance carbs.
Power socket.

[VTRDark]

Carb balance if I got the right bits

Most important part is the the brass adapter.
http://www.carbtune.co.uk/carbaccs.html
http://www.vtr1000.org/phpBB3/viewtopic ... 30#p148551

And if you get a couple of blanking plugs which you will see at the checkout, you could end up like this http://www.vtr1000.org/phpBB3/viewtopic ... 30#p259491

And you need a T Piece which you can get from Halfords

Carbtune are exceptionally fast on delivery. Highly recommended.

(:-})