Here we go again....

Show off your bike, modifications or projects and share them with the world.
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Here we go again....

Post by Shauned71 »

Thank you for the comments... now that she's near together I have quite a grin on my face :biggrin Pretty much got what I want look wise, now just want to see her in the sunshine so I can see how the effect shows up in the black. Still got a few bits to do to finish off but nearly there. Bike hasn't been polished up in the photo's, have a few spots of orange peel and a few dry spots to tend too.... was a bit cramped in the paint shop with so many bits set up at one time so it meant getting around some pieces were either a tad difficult or I wasn't getting the quite enough light to see what I was doing properly... no complaints though, won't take long to nib and polish up.

Will sort out decals.. well do my paint job if a few weeks time as well as paint calipers up plus need to clean up rear exhaust but for now out of time. Will also at a later date but as soon as poss sort rear undertray out... it ain't quite straight but was a pain to fit and again don't have time to play around with it right now. I'm sure there will be a few other bits that I will think of to do.... but for now, here she is :D

Image

Image

Image

Image

Image

Image

Image
User avatar
vtrjock
Posts: 299
Joined: Sun Sep 08, 2002 9:47 am
Location: Turnip land in rural Lincolnshire
Contact:

Re: Here we go again....

Post by vtrjock »

That is sweet my friend...lovin the black n orange. 8)
Image
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: Here we go again....

Post by agentpineapple »

:thumbup: :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:
HEY YOU GUYS!!!!!!
User avatar
Kev L
Posts: 11286
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: Here we go again....

Post by Kev L »

Looking good mate, well done :thumbup:
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
User avatar
AMCQ46
Posts: 16736
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: Here we go again....

Post by AMCQ46 »

That's turned out brilliantly :thumbup: Look forwards to see it in the flesh when we are back in Wales
AMcQ
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Here we go again....

Post by lloydie »

Very nice ,well done :thumbup:
User avatar
bigtwinthing
Posts: 5577
Joined: Mon Dec 17, 2012 7:52 pm
Location: Hampshire

Re: Here we go again....

Post by bigtwinthing »

wow looks great, get some orange on that bellypan!!! theres a really nice Red and White one on here that would look good on yours with the white orange!!! :lol: You must be chuffed !
missing the noise, not the vibes. However never say never!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Here we go again....

Post by VTRDark »

Bike hasn't been polished up in the photo's, have a few spots of orange peel and a few dry spots to tend too....
Getting in there before I do :lol:

I likey very much. Welcome to the super fast Black club :P looks superb mate and I would love to see a close up pic of the fleck in the sunshine.

(:-})
==============================Enter the Darkside
althefish
Posts: 64
Joined: Fri Apr 18, 2014 4:25 pm
Location: Cardiff
Contact:

Re: Here we go again....

Post by althefish »

Looks fantastic!
User avatar
Wicky
Posts: 7895
Joined: Sat Feb 11, 2006 2:43 pm
Location: Colchester Essex
Contact:

Re: Here we go again....

Post by Wicky »

Like it

Dare you to put these matching decals on it …. :wink:

Image
It may be that your whole purpose in life is simply to serve as a warning to others.

ImageVTR Firestorm and other bikes t-shirts
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Here we go again....

Post by Shauned71 »

Thanks again for your comments.. i'm pretty happy how things turned out.
cybercarl wrote:Getting in there before I do :lol:



(:-})
Yes :lol:
Wicky wrote:Like it

Dare you to put these matching decals on it …. :wink:

Image
Errrr No! :lol:

I have had a few changes of mind of what else i'm doing....

Just come back from the TT's (Great time i'll add, will try and post a few pics etc up shortly) Very much enjoyed the whole experience, did plenty of riding through the week also going out on mad Sunday... however... picked up a fair share of chips flying over the mountain pass, have an slight oil leak, front wheel bearing started grinding like hell soon as I got there, broke my seat cowl because I didn't lift my leg high enough :lol: I suddenly realised I don't want a mint bike.. at least not too mint.. bike looks nice as is although I will still nib and polish plus add a few decals & tank pad but I wont be spraying on the decals as planned.. I'm not disheartened in any way with the marks and bits that went wrong but I think that if I took the bike further taking all the trouble to flat and polish to look like glass as i planned, spray on decals etc etc I'll just end up in a state where I won't want to use or ride the bike in quite the same way, I don't want to be in a position where i'm pee'd off because of a chip or scuff. I want to take this bike everywhere, I already use it daily and i don't do winter breaks so sun, rain or snow she keeps rolling all year around so i'm basically going to leave bike as it.. and enjoy it to the max! Will keep it clean and serviced ofc.. and over time will buy a few extra goodies for it.. want to fit a brace to rear swing arm, maybe rear sets, maybe swap out front end another time.. thinking about getting a orange iridium screen and im sure there will be a few extra things ill think off but as far as paint work goes she can pretty much stay as is.

Plus i have a few stickers which don't go with the bike at all but i'm gonna stick them on there anyway :lol:
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Here we go again....

Post by VTRDark »

Do you think the paint maybe needed a bit more time to fully cure and harden off before taking stone impacts. A ceramic coating is a good idea too. It works on a nano scale and actually bonds into the microns of paint and dries harder than paint and protects it from the elements. The downside to Ceramic coating is that I don't think it can be applied directly over fresh paint. IIRC the paint needs to be left for something like 3 months so it's well and truly fully cured and hardened off before applying it. :think:

(:-})
==============================Enter the Darkside
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Here we go again....

Post by Shauned71 »

Paint was low baked.. should of been plenty hard enough. Chips are not too big and are mostly on the front of the belly pan. Belly pan is fibre glass so a lot harder than normal fairing panels and more likely to chip. Quick touch up and I will put a clear piece of vinyl across the front when I get chance.

I'm guessing I picked them up going up and down the M5 and M6.. road works going on around the place so sure to of being throwing plenty up off the front wheel.
User avatar
sirch345
Site Admin
Posts: 22373
Joined: Mon Aug 25, 2003 10:35 pm
Location: The West Country.

Re: Here we go again....

Post by sirch345 »

She's looking great Shaun, well done mate :clap: :lol:

Chris.
User avatar
Shauned71
Posts: 637
Joined: Wed Mar 13, 2013 12:09 am
Location: Cardiff, Wales

Re: Here we go again....

Post by Shauned71 »

sirch345 wrote:She's looking great Shaun, well done mate :clap: :lol:

Chris.
Thanks Sirch... but.. whoopsie :oops:

Weekend before last... bad me! Completely misjudged a bend and ended up bailing off down a grass embankment.. Bike had the last say in the matter.. kicked me off back in to the road though I must add I thought i bounced pretty well :lol:

Image
Post Reply