what have you done to your "bike" today

[lloydie]

After fitting amcq' sold belly pan and liking the black with gold wheels I removed it to start the refurb as it was looking a bit rough and with a hole in it .
I started off by removing the decals that had been lacquered over then removed the lacquer tho it was easier than I thought it would be as it hadn't been prepped right and the lacquer just flacked off :-) .
I gave it a clean and a rough up with a scotch bright pad .
I then patched the hole with some glass fiber .
I used some parcel tape to stop the resin bleeding through .

Going well so far me thinks

[lloydie]

Iam not keen on the expansion bottle if i can be a bit picky!

It's only there till I get the jetting right then the standard one will be refitted .

Thanks Marty another wheelie bin club member :-)

[lloydie]

I finally finished the H U G E airbox, plus all of the seals, glands, mounting points, seals, glass fibre etc. Mountings for Flo Commander fitted.

I can't be arsed to fit it now...
The bike's running well as it is, but when I fit this it will undoubtedly Fup the fuelling, and I really don't fancy another round of re-jetting just yet.
Next weekend will be my birthday weekend and I'm going to Brands for the weekend after fitting a chain for a forum member Sat AM so it ain't happening then.
Perhaps weekend after.

But then, coming soon to a fantasy near you.....
High Comps: in stock
Reground cams: In Stock
Shims to suit above: in Stock
Rings: in stock
Hone: in stock
big end bolts: On order.
Soon..........soon come.....
(google "soon come" Peter Tosh, or ask the wife)

im looking forward to the testing of this keep up the good work tony

[lloydie]

This morning I finished off the belly pan and gave it some paint :-) then fitted it to get it out the way till it hardens off . Then I'll buff it up

[Ckennedy]

Looking good Lloyd

[Hvornum]

This morning I finished off the belly pan and gave it some paint :-) then fitted it to get it out the way till it hardens off . Then I'll buff it up
http://img.tapatalk.com/d/14/07/14/uradyqar.jpg
http://img.tapatalk.com/d/14/07/14/8ahybeqy.jpg

Looking good!
What's that bulky thing you got on your handlebars mate?
Out of curiosity, what's it do? Looks like a 1940's ammo mag from a gangster movie

[lloydie]

It's a sat nav holder ! Or lube dispenser :-)

[Ckennedy]

In Lloyds case it's a lube dispenser, for anyone else it's a Sat nav holder

[gl_s_r]

Pepper grinder would be a better option...

even though I like it course.

[lloydie]

Pepper corn sauce !! :-) and I like to do the grinding in motion

[lloydie]

As I had time today I loaded up kermit ready for the stag run in two weeks.

Just need to put together a tool kit and cloths now
It should be wheelie good fun !!
I upped the rear preload and dampening and the same on the front

[Ckennedy]

I did my packing for it too as Lloyd reminded me about it. Checked my tent and all is good. Luggage sits beautifully on this bike. Nice and clean all round.

The middle bag has nothing in it yet but will consist of some form of breakdown kit and maybe a pair of trainers

[PARSLEYRIPPER]

Routed the wiring loom back through the frame. Put the clocks back on.

[AMCQ46]

I did my packing for it too as Lloyd reminded me about it. Checked my tent and all is good. Luggage sits beautifully on this bike. Nice and clean all round.

The middle bag has nothing in it yet but will consist of some form of breakdown kit and maybe a pair of trainers

chris your bike looks like it has a sad face in this picture.......... its not looking forward to the stag do

[MacV2]

So are neither Lloydie or CK planning to ride at all for the next two weeks ?

What's wrong with loading the bike the night before the off...

I bet you both pull it all off at least twice before then checking for something that you cant remember if you packed or not...