coil brackers
- PARSLEYRIPPER
- Posts: 111
- Joined: Sun Sep 29, 2013 12:09 am
coil brackers
Hi folks, I am getting close to finishing the bike but have run into another problem. Where do the coils bolt to? I thought this would be obvious but its not. I have googled and all sorts but no joy. The powder coaters sent a bracket back with the bits that i must have left attached to the frame, hmm looks like a coil bolts to this bracket but if so where does the bracket bolt to? Only one bracket as well so i am guessing the other coil bolts straight to the frame. Any help would be great, thanks.
- PARSLEYRIPPER
- Posts: 111
- Joined: Sun Sep 29, 2013 12:09 am
Re: coil brackers
DOH....its supposed to read brackets, the sea is rough today.
Re: coil brackers
The position of front and rear coil is illustrated in the searchable PDF VTR Honda Service manual See pages 23, 24, 25, 290, 297
VTR1000F (Superhawk) Firestorm Service Manual PDF > http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=18025
and in the Haynes manual it is covered in section 5-3 Ignition System / 'Ignition HT coils - removal & installation' along with pics.
VTR1000F (Superhawk) Firestorm Service Manual PDF > http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=18025
and in the Haynes manual it is covered in section 5-3 Ignition System / 'Ignition HT coils - removal & installation' along with pics.
It may be that your whole purpose in life is simply to serve as a warning to others.
VTR Firestorm and other bikes t-shirts
