vtr race seat pod

thomas111 · Post by **thomas111** » Tue Nov 04, 2014 12:40 am

Hi guys does anyone make race plastics for the vtr

Wicky · Post by **Wicky** » Tue Nov 04, 2014 12:54 am

Search for mario nava fairings

thomas111 · Post by **thomas111** » Tue Nov 04, 2014 4:04 pm

Thanks i will

lloydie · Post by **lloydie** » Tue Nov 04, 2014 4:29 pm

I emailed him and it's about £250 for the seat unit and could have one ready as soon as you like .

I found these cheaper and they do a full fairing kit too

http://www.motoforzafairings.com/en/pro ... eat-closed

http://www.motoforzafairings.com/en/pro ... s-Racing-2

Stephan · Post by **Stephan** » Wed Nov 05, 2014 7:18 am

lloydie: front fender from motoforza I have looks fine, but I read some issues with fit on race fairings. Some were good, some not. I think they are better then sebimoto, but there is no general consensus. Some were good with sebimoto, some with motoforza, and vice versa.

The best are these http://www.bikesplast.com/motorcycle-ra ... ings/honda, but not for our bikes ...

lloydie · Post by **lloydie** » Wed Nov 05, 2014 7:24 am

It's always a gamble with grp panels that's for sure

Stephan · Post by **Stephan** » Wed Nov 05, 2014 7:32 am

at least it took only two weeks to make and deliver my fender. Black colour for decent price from them is looks good enough, I don´t have need to do repaint it.

thomas111 · Post by **thomas111** » Wed Nov 05, 2014 11:57 am

Guys I got a reply back from Italy he does not make the vtr stuff any more Mario sold all the moulds to a guy in Wales
Mike ferriday and Mario forward my details on to him anyone no if he is on the forum

Wicky · Post by **Wicky** » Wed Nov 05, 2014 12:06 pm

http://www.vtr1000.org/phpBB3/viewtopic ... mario+nava

thomas111 wrote:Guys I got a reply back from Italy he does not make the vtr stuff any more Mario sold all the moulds to a guy in Wales
Mike ferriday and Mario forward my details on to him anyone no if he is on the forum

thomas111 · Post by **thomas111** » Wed Nov 05, 2014 12:12 pm

Thanks wicki and the rest of the guys for help on this topic

agentpineapple · Post by **agentpineapple** » Wed Nov 12, 2014 4:11 am

I would NOT recommend sebimoto, I bought a single seat cowl made of carbon fibre and it was very poorly made, missing one of the 3 mounting brackets, the remaining two brackets are misaligned, the carbon is very thin, to the point where you can see thru it if you hold it up to the sun, it was also misshaped and I had to trim it down myself.
when I contacted them, they agreed to refund me minus the shipping costs, which are £20 to the Czech rep, or a 15% refund.
I will never buy from them again and I advise all forum members to steer clear of them.

thomas111 · Post by **thomas111** » Tue Nov 18, 2014 5:57 pm

Thanks for the heads up on that company agentpineapple am still looking for one as not heard from the guy that bought all the vtr moulds in Wales does or will the sp1or 2 seat pod fit the firestorm

Wicky · Post by **Wicky** » Tue Nov 18, 2014 6:51 pm

Just about anything can be made to fit with some crafting / sub frame modification. Have a search there have been VTR SP, R1 & Blade backends transplanted on.

thomas111 · Post by **thomas111** » Tue Nov 18, 2014 7:45 pm

Thanks wicky

popkat · Post by **popkat** » Tue Nov 18, 2014 7:58 pm

http://www.skidmarx.co.uk/13-honda
scroll to bottom of page, fairing, seat and belly pan.

VTR1000.ORG

vtr race seat pod

vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod

Re: vtr race seat pod