what have you done to your "bike" today

[MacV2]

hahahahahaha I remember mate, and it was fast blue.......

So if you remember it why didn't you use it ?

[agentpineapple]

hahahahahaha I remember mate, and it was fast blue.......

So if you remember it why didn't you use it ?

I can't bloody find it...............doh!

[kev64]

Fitted rust free and painted oil cooler feed pipes
Took engine covers to powder coaters

[VTRDark]

Got some new wheels.....no more warped front wheel Front feels so much more smoother and braking has improved though that may be down to the bobbins getting freed up as there was a few tight ones. Disks have been cleaned and shine removed (thanks Marty) and some new shiny disc bolts. Still need to get some shiny calliper bolts at some stage. And then the bike had a good clean and general lube up/regrease as it needed it.







And thanks for the wheels Duffers.

(:-})

[agentpineapple]

we did cover a fair bit today, and you didn't pay me for the cab journey, bloody bilker!!!!!!!!

[lloydie]

Look like its getting better Carl

[agentpineapple]

replaced the front wheel spindle and spacers, all nicely lloydie lubed up, as carl said, we free'd the disc bobbins, cleaned the disc's and calipers.
pumped up the tyres, adjusted the chain, nice shiny disc bolts all round, replaced a numberplate plastic nut & bolt. rubbed down and greased the rear wheel spindle, gave it a little clean, I think the yellow wheels look fantastic against the black paintwork, also ties in nicely with the bikes yellow decals....

[Duffy1964]

we did cover a fair bit today, and you didn't pay me for the cab journey, bloody bilker!!!!!!!!

Don't start on Carl Marty, you know he had a run in with a cabbie recently

[Duffy1964]

Got some new wheels.....no more warped front wheel Front feels so much more smoother and braking has improved though that may be down to the bobbins getting freed up as there was a few tight ones. Disks have been cleaned and shine removed (thanks Marty) and some new shiny disc bolts. Still need to get some shiny calliper bolts at some stage. And then the bike had a good clean and general lube up/regrease as it needed it.








And thanks for the wheels Duffers.

(:-})

Those wheels look so much better Carlos, really suits the black bodywork, glad I have helped with the transformation fella

[lloydie]

Done a lot more to the engine today .
Not much more to do


Sent from my iPhone using Tapatalk

[Duffy1964]

Nice one Lloydie

[agentpineapple]

roughly what power output are you wanting to achieve lloydie?
and don't say as much as possible.....

[lloydie]

roughly what power output are you wanting to achieve lloydie?
and don't say as much as possible.....

As much as I can afford .
But Tbh I'll be happy if it runs and if it gives 115+ I'll be happy any less and I'll spit my dummy out

[VTRDark]

Woo hoo, not far to go now Lloyd. You do realise that Al will still be faster than you.

(:-})

[lloydie]

Woo hoo, not far to go now Lloyd. You do realise that Al will still be faster than you.

(:-})

No he won't as I'll let his tyres down [FACE WITH STUCK-OUT TONGUE AND WINKING EYE]