baldrocks !!!'n. Crankcase end cap!!!!
baldrocks !!!'n. Crankcase end cap!!!!
Why did honda make this out of chocolate !!!!!
10mm hex key was pretty slack as the cap looks like someone has been at it before.
Just using a bar on the hex key and it's just cutting through the cap - tried the impact driver - no chance
Ideas guys ??? Am I going to have to drop the oil and get the whole cover off ?
10mm hex key was pretty slack as the cap looks like someone has been at it before.
Just using a bar on the hex key and it's just cutting through the cap - tried the impact driver - no chance
Ideas guys ??? Am I going to have to drop the oil and get the whole cover off ?
Re: baldrocks !!!'n. Crankcase end cap!!!!
Tap in a bigger size hex and a few gentle taps as you turn
TIP; Never take a sleeping pill and laxative on the same night
http://morrisonbhp.net/
http://morrisonbhp.net/
Re: baldrocks !!!'n. Crankcase end cap!!!!
Struggling to find a bigger hex key
Re: baldrocks !!!'n. Crankcase end cap!!!!
Sorted !!!!!!!!
The heat and centre punch approach did it - new one ordered
The heat and centre punch approach did it - new one ordered
-
- Posts: 976
- Joined: Mon Nov 14, 2011 2:00 pm
- Location: Whaplode Drove, Lincolnshire
Re: baldrocks !!!'n. Crankcase end cap!!!!
i always try to keep a spare on the basis i have never removed one without making a mess ....well may be one out of eight
- carmanbikes
- Posts: 894
- Joined: Sat Dec 22, 2012 11:09 am
- Location: Wigan
Re: baldrocks !!!'n. Crankcase end cap!!!!
One of those would be great
Ordered an oem one but would like something better - it doesn't even look corroded!!!
Ordered an oem one but would like something better - it doesn't even look corroded!!!
- carmanbikes
- Posts: 894
- Joined: Sat Dec 22, 2012 11:09 am
- Location: Wigan
Re: baldrocks !!!'n. Crankcase end cap!!!!
I'm sure someone will be along in a short while and tell you who to contact, I got a pair but can't remember who from, They did a great job and posted them really quickBrianC wrote:One of those would be great
Ordered an oem one but would like something better - it doesn't even look corroded!!!

- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: baldrocks !!!'n. Crankcase end cap!!!!
How clean is that bike!!! bloody hell it looks ace.
missing the noise, not the vibes. However never say never!
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: baldrocks !!!'n. Crankcase end cap!!!!
I'm lead to believe he's out of stock .carmanbikes wrote:I'm sure someone will be along in a short while and tell you who to contact, I got a pair but can't remember who from, They did a great job and posted them really quickBrianC wrote:One of those would be great
Ordered an oem one but would like something better - it doesn't even look corroded!!!
It's hoarders like myself that has a spare set of the titaniums laying around :-)
Lube, no lube, it's your choice .
Re: baldrocks !!!'n. Crankcase end cap!!!!
But who is he 

- carmanbikes
- Posts: 894
- Joined: Sat Dec 22, 2012 11:09 am
- Location: Wigan
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: baldrocks !!!'n. Crankcase end cap!!!!
A end of a bellBrianC wrote:But who is he
Lube, no lube, it's your choice .
Re: baldrocks !!!'n. Crankcase end cap!!!!
I'll say no more and rely on mr silver
Re: baldrocks !!!'n. Crankcase end cap!!!!
I can only confirm this... He is indeed a end of a belllloydie wrote:A end of a bellBrianC wrote:But who is he
Lube, no lube, it's your choice .
Why ask... sometime you just go to do it and find out?