Anybody set up a quickshift?

[NZSpokes]

Wouldnt mind a quickshift on the VTR. Anybody made or fitted one?

[sirch345]

Probably not a lot of help if you're hoping to make your own, but the only member on here I can remember fitting a quick shift gear change to his Storm was "theweeeman" and that was years ago. He had his bike fitted with a Pro-Shift gear changer, he didn't do it himself:-
http://www.proshift.com/proshift_ps2_bike_system

Theweeemans thread here:-
http://www.vtr1000.org/phpBB3/viewtopic ... 849#p20849

Chris.

[tony.mon]

Thinking about adding one to the pcv on the sp2.I'd like an Hm Racing one, but they're top money.

[NZSpokes]

Probably not a lot of help if you're hoping to make your own, but the only member on here I can remember fitting a quick shift gear change to his Storm was "theweeeman" and that was years ago. He had his bike fitted with a Pro-Shift gear changer, he didn't do it himself:-
http://www.proshift.com/proshift_ps2_bike_system

Theweeemans thread here:-
http://www.vtr1000.org/phpBB3/viewtopic ... 849#p20849

Chris.

Cheers Chris

I was thinking more of a DIY deal. But the more i look into it the harder it seems.

[agentpineapple]

i had a quickshifter on my sp1, great piece of kit, iirc dynojet do one for a storm, a bit different from the type on modern bikes but the same result, i did see them on german ebay, and i think rob de hoo was trying to sort something out regarding them.

[tony.mon]

On a Storm you can only cut the ignition, as it has carbs.
On an SP1 and 2 you can also cut injectors.

[NZSpokes]

On a Storm you can only cut the ignition, as it has carbs.
On an SP1 and 2 you can also cut injectors.

Will make for a nice bang on gear changes.

[tony.mon]

Oh, yes....
But ideally get one with variable time cuts for each gear, as the differences between ratios varies.

[TravisZack]

this is the one Rob-de-Hoo is selling on Facebook

http://www.healtech-electronics.com/products/qse/