Single exhaust headers

VTR Phoenix · Post by **VTR Phoenix** » Wed Jan 27, 2016 10:15 pm

Finally decided to go for the twin can set up so no longer need the single header set up. In good structural condition, definitely fit the storm as I checked for fitment. Just need a clean up but good to go. The "dent" is so it avoids the swing arm when fitted. Believe these are purpose made and not a 2-2 system cut done as they look original. Includes the link pipe for the single can but no can included. So full single can header setup with link pipe only, not sure what these go for but if anyone is interested £50 including p&p?

lloydie · Post by **lloydie** » Thu Jan 28, 2016 7:05 am

That's the one I made the other year by the looks of it .
I did a thread about it .
My 2 into 1 project now with dyno print out
http://www.vtr1000.org/phpBB3/viewtopic.php?t=24101

VTR Phoenix · Post by **VTR Phoenix** » Thu Jan 28, 2016 7:44 am

That's the actual ONE you made? If it is it looks factory made for purpose. Got this one and the two can set up with the unfinished project I purchased.

lloydie · Post by **lloydie** » Thu Jan 28, 2016 7:52 am

Did you get the carbon Leo vince broken can with it ?

lloydie · Post by **lloydie** » Thu Jan 28, 2016 7:57 am

Yeo it's mine that I made .
Who ever buys it DONT fit a carbon can as it'll blow it to bits .

VTR Phoenix · Post by **VTR Phoenix** » Thu Jan 28, 2016 8:11 am

No I didn't get any cans just the two sets of headers, had to buy the cans separately. All in all I have spent nearly 800 getting parts and paint for it. Think I may have paid a bit too much for it in the first place. In it for 1600 now but apart from the wanted items that's it and just spraying and build now.

lloydie · Post by **lloydie** » Thu Jan 28, 2016 8:21 am

When you get into about 4K then your in the club lol

VTR Phoenix · Post by **VTR Phoenix** » Thu Jan 28, 2016 8:27 am

Don't feel so bad now lol, thinking about the flywheel mod that I've read so much about and a change of rear shock. It's got the front end swap and mcct's so other than the above can't think of anything else to do to it.

lloydie · Post by **lloydie** » Thu Jan 28, 2016 8:44 am

Give it time and you'll find a never ending list of things to do . Be warned engine tuning is crazy expensive

fabiostar · Post by **fabiostar** » Thu Jan 28, 2016 10:11 am

VTR Phoenix wrote:Don't feel so bad now lol, thinking about the flywheel mod that I've read so much about and a change of rear shock. It's got the front end swap and mcct's so other than the above can't think of anything else to do to it.

do the flywheel mod. its the fun fun you will ever have lol

playerone · Post by **playerone** » Thu Jan 28, 2016 9:26 pm

might be tempted with this for a 2-1-2 underseat with the single sider.......

tony.mon · Post by **tony.mon** » Thu Jan 28, 2016 9:40 pm

playerone wrote:might be tempted with this for a 2-1-2 underseat with the single sider.......

Go for it! It's not my money.....

VTR1000.ORG