MIG hi level exhausts wanted.

[Hondo]

Looking for a set of MIG hi level exhausts for my Storm. Lots of cash waiting for a good set. Can even part exchange my Sebring hi levels for a set or nearly new standard exhausts.
Cash waiting.
Cheers
Andy

[grumpyfrog]

I have a pair of ally ones that one has a bit of road rash around the end that I should really have gotten round to fixing at some point. But never got round to since I swapped them for a pair of remus. Best of luck finding a clean pair. Only 2 other sets I have seen, tony's carbon ones and a guy in Glasgow area who came out to get wet on the Scottish run out 2 years ago. As your handy repairing stuff, if you want I can send a pic to an email for you to ponder.

[Stevo Kifaru]

I have a pair of ally ones that one has a bit of road rash around the end that I should really have gotten round to fixing at some point. But never got round to since I swapped them for a pair of remus. Best of luck finding a clean pair. Only 2 other sets I have seen, tony's carbon ones and a guy in Glasgow area who came out to get wet on the Scottish run out 2 years ago. As your handy repairing stuff, if you want I can send a pic to an email for you to ponder.

I've got MiG hi-levels as well, ally finish (not selling them I'm afraid) had them professionally polished & in less than a month even with my best efforts they had returned to their previous state. Sound effing gorgeous still though

[Hondo]

Thanks for your replies guys. I want the carbon types and I will get a set one day.

[agentpineapple]

Thanks for your replies guys. I want the carbon types and I will get a set one day.

easy enough to buy carbon sleeves for them, contact pjengineering...

[tony.mon]

Thanks for your replies guys. I want the carbon types and I will get a set one day.

easy enough to buy carbon sleeves for them, contact pjengineering...

The Mig sleeves are much thicker than standard sleeve tubes which prevents them blowing holes.

[agentpineapple]

Thanks for your replies guys. I want the carbon types and I will get a set one day.

easy enough to buy carbon sleeves for them, contact pjengineering...

The Mig sleeves are much thicker than standard sleeve tubes which prevents them blowing holes.

I suppose that's more important when you remove all the baffling hahahaha

[Miztaziggy]

I'm selling a pair of carbon High level cans but they're not MIG, they're Viper. You could always change the sticker :-)



Sent from my SM-G920F using Tapatalk

[Hondo]

Still looking. But would also consider some remus carbon cans.

[grumpyfrog]

I have them.
Cans with low level link pipes and straps, sure I've got the springs too if your link pipes need them.

ID is bigger than standard on the cans but I had a spacer machined to take up the difference. Right hand can has some scratches on the end form last months spill, but could be polished out if anyone has the time, I've just cleaned them and put away at the moment. Still got the original boxes.
Removable baffels installed.

Shout if your interested.

[Hondo]

I have them.
Cans with low level link pipes and straps, sure I've got the springs too if your link pipes need them.

ID is bigger than standard on the cans but I had a spacer machined to take up the difference. Right hand can has some scratches on the end form last months spill, but could be polished out if anyone has the time, I've just cleaned them and put away at the moment. Still got the original boxes.
Removable baffels installed.

Shout if your interested.

Hi mate. What is it you have? High level Mig Pipes? Coz that's what I am after unless you mean the Remus ones?

[grumpyfrog]

Lol.
I have ally high level migs and low level carbon remus. !!! I know it's the other way round you want!

[tony.mon]

You will have trouble buying the genuine thick MIG carbon sleeves, they went broke a long time back. As they were a French company, try French eBay.

[Hondo]

I'll keep looking. You never know.

[grumpyfrog]

Hondo,
Did you snap up those ones on Ebay yesterday?