Oct 17 track day bike build. odd bits needed

Moderator: VTRDark

Post Reply
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Oct 17 track day bike build. odd bits needed

Post by StuartWags »

This bike stood 9 years after a CCT failure. It has been in my garage for 2 year in bits, so i have lost or nicked for other bikes, that are a complete butt to get.
it looked like this once


It was a barn job when i found it

The list so far is:-
1). a pair of compression limiters / spacers for the front mount on the seat cowl
2). a seat latch. I have the cables and lock
3). tank rear mount rubbers / top hats
4). front sub frame preferably straight
5). Rear brake reservoir. I have the master cylinder

As you can see most of these usually require buying a larger chunk of motorcycle. If anyone has the bits kicking around it would be nice if we could do a deal

current status
Image

current status

also looking for 4 standard indicators
grumpyfrog
Posts: 1553
Joined: Thu Apr 14, 2011 1:22 pm
Location: Tayside

Re: Oct 17 track day bike build. odd bits needed

Post by grumpyfrog »

I have 2 standard indicators in a box somewhere if I can find it.
Don't hassle me
I'll get there at some time
User avatar
MacV2
Posts: 18017
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Oct 17 track day bike build. odd bits needed

Post by MacV2 »

Have a rear brake res.

Might have a seat latch.

You'll have to wait till Sat so Frank can serch for the latch tho...
Making up since 2007, sometimes it's true...Honest...
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Oct 17 track day bike build. odd bits needed

Post by StuartWags »

grumpyfrog wrote:I have 2 standard indicators in a box somewhere if I can find it.
these are not track day critical bot i would like them for road riding. pm me with details
tony.mon
Posts: 16270
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Oct 17 track day bike build. odd bits needed

Post by tony.mon »

I have a complete seat latch, so could spilt just the latch for you.
PM'd
It's not falling off, it's an upgrade opportunity.
User avatar
MacV2
Posts: 18017
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Oct 17 track day bike build. odd bits needed

Post by MacV2 »

Rear res in stock...

Image

Image

£6.00 posted.

No seat latch so have Tonys one.
Making up since 2007, sometimes it's true...Honest...
User avatar
freeridenick
Posts: 1659
Joined: Fri May 23, 2014 1:30 pm
Location: Derbyshire

Re: Oct 17 track day bike build. odd bits needed

Post by freeridenick »

Should have a front sub-frame after the weekend. All being well.
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Oct 17 track day bike build. odd bits needed

Post by VTRDark »

Harris rearsets too. That's another storm on the way to be saved :thumbup:
==============================Enter the Darkside
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Oct 17 track day bike build. odd bits needed

Post by StuartWags »

cybercarl wrote:Harris rearsets too. That's another storm on the way to be saved :thumbup:
CBR forks, White power rear shock and front springs, dyno jet and K&N, ohins steering damper

Got the high level yoshi cans to Re-eves yet

Saved? i stopped counting after ten but in the teens with this one. had 3 this year
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Oct 17 track day bike build. odd bits needed

Post by StuartWags »

Back in one lump. lots of little jobs left to do. Need to get some rubber on its own wheels and re fit them. The rear sets need setting up, brakes need sorting out etc etc. but it has been up the drive and back

Image
User avatar
Miztaziggy
Posts: 2451
Joined: Fri Apr 15, 2011 9:15 pm
Location: Tadcaster

Re: Oct 17 track day bike build. odd bits needed

Post by Miztaziggy »

Looks good :-)

Looking forward to chasing that round Cadwell :D

Sent from my SM-G920F using Tapatalk
Image
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Oct 17 track day bike build. odd bits needed

Post by StuartWags »

Miztaziggy wrote:Looks good :-)

Looking forward to chasing that round Cadwell :D

Sent from my SM-G920F using Tapatalk
It will have some different bodywork for that session
Post Reply