a bit of spondoness.

[fabiostar]

now that with a number plate is how i intend mine to end up . it mite take a bit of time and wont be this year im sure but its gona be a rolling rideable bike by spring time .

If you want it to look like yeti's you better start saving and hunting on the jap auction sites as you won't find the bits on the western world only Asia (lots of good sh1t over there (jonsey might be able to help there )

looking as good as that is a long way down the road lol....

[lloydie]

And about 20k !!! Unless you get yeti to part with his ! But unlikely

[fabiostar]

And about 20k !!! Unless you get yeti to part with his ! But unlikely

im working on murdering him as we speak lol

[VTRDark]

im working on murdering him as we speak lol

You have not met the Yeti then. You may may be able to reach his groin area

[fabiostar]

im working on murdering him as we speak lol

You have not met the Yeti then. You may may be able to reach his groin area

how can so much porn be allowed

[lloydie]

im working on murdering him as we speak lol

You have not met the Yeti then. You may may be able to reach his groin area

how can so much porn be allowed

Just a shame it's like looking at 1990 old jaz mag !!!
Still nice tho even with a few wrinkles and a few heaths of hair !!

[fabiostar]

do you mean the bike or yeti lol

[lloydie]

do you mean the bike or yeti lol

Yeti is just a big girl !! But I still wouldn't want to be bitch slapped by him/her

[fabiostar]

do you mean the bike or yeti lol

Yeti is just a big girl !! But I still wouldn't want to be bitch slapped by him/her

i see your point lol... well watch strictly come dancing or mancave. mmmmmmmmm new quick action throttle and linkage bearings cleaned and greased . liitle small steps. looking round the bike eveythings been drilled for lockwire tho not on the engine.

[lloydie]

Pull the cam covers and measure the cam lobs , might be a nice surprise in there ,also check the porting

[StormyRob]

Seems to be a fantast find fabulous. Well done. I am sure a lot are envious.

[Kev L]

How you doing Rob? Did you get yourself another bike?

[fabiostar]

How you doing Rob? Did you get yourself another bike?

lol yeah one of those slow red one lols.

actually after calling the man a numpty for wanting to streetfighter it iv since changed my mind, its a tad rough on the outside but after pulling it apart it seems every bolt has had coppa slip grease on it and its better than its looks would have me believe..so well done sir.

[fabiostar]

Pull the cam covers and measure the cam lobs , might be a nice surprise in there ,also check the porting

now on that subject . had a wee peep yesterday and pulled the covers of aswell. somebody at some stage has done a little polishing to the inlet ports compared to my own but heres the rub(no pun of course) the cams. this might sound stupid and i got a friend down whos wiser than me to check but the engine seems to have 4 exhaust cams in it? wtf is that all about,is it possible cause its running fine?

answers on a postcard to a freaked out owner

[Kev L]

Rob's gone over to the dark side he displayed such good taste with his last bike! Go's to show you have to be vigilant or you may end up making a complete mistake in your choice of colour!!!!