Race Cans wanted, please.

podman · Post by **podman** » Wed Feb 08, 2017 9:40 pm

...or a fruity set at least..

I haven't got the asking price for a set of new Akros, something reasonably priced, clean and straight, dont care of what material, to bolt straight onto my 1999 bike, please.

Thanks in advance.

MacV2 · Post by **MacV2** » Wed Feb 08, 2017 10:09 pm

Ive got a set of Micron race cans...Bit tatty, need a good clean & polish but come with the link pipes & straps.

They will need some springs tho as they are missing...

£70 posted...

These heve been sold...

podman · Post by **podman** » Wed Feb 08, 2017 10:20 pm

Hi mate ..tatty I can overlook for £70 but there not dented or bashed about?

Would I need 4 x springs to hold the cans to the link pipes and then 2 clamps to hold the link pipes to the exhaust headers/collector box?

agentpineapple · Post by **agentpineapple** » Thu Feb 09, 2017 7:37 am

podman wrote:Hi mate ..tatty I can overlook for £70 but there not dented or bashed about?

Would I need 4 x springs to hold the cans to the link pipes and then 2 clamps to hold the link pipes to the exhaust headers/collector box?

that's correct about the springs and clamps podman, all cheap and easy to buy online great price btw mac....

KermitLeFrog · Post by **KermitLeFrog** » Thu Feb 09, 2017 8:39 am

I have some as well. Got to go out now but will be back in a couple of hours and will post pics.

MacV2 · Post by **MacV2** » Thu Feb 09, 2017 9:43 am

Just checked them no dents, some scratches but not deep, they just need a very good clean up.

Yes 4 springs needed to hold cans to links, there are a couple of clamps included which might be useable with a good scrub... But springs & clamps cheap enough to buy.

I sold a set of Microns just like these but much cleaner late last year for £150 so these are cheap...Been sitting around for a while unused & unlikly to be used...

podman · Post by **podman** » Thu Feb 09, 2017 6:23 pm

MacV2 wrote:Just checked them no dents, some scratches but not deep, they just need a very good clean up.

Yes 4 springs needed to hold cans to links, there are a couple of clamps included which might be useable with a good scrub... But springs & clamps cheap enough to buy.

I sold a set of Microns just like these but much cleaner late last year for £150 so these are cheap...Been sitting around for a while unused & unlikly to be used...

Ive studied the pics a little more mate and I think I will pass on these, thank you anyway, they are a good buy no doubt and im sure someone will snap them up. Thanks .

MacV2 · Post by **MacV2** » Thu Feb 09, 2017 7:37 pm

podman wrote:
MacV2 wrote:Just checked them no dents, some scratches but not deep, they just need a very good clean up.

Yes 4 springs needed to hold cans to links, there are a couple of clamps included which might be useable with a good scrub... But springs & clamps cheap enough to buy.

I sold a set of Microns just like these but much cleaner late last year for £150 so these are cheap...Been sitting around for a while unused & unlikly to be used...
Ive studied the pics a little more mate and I think I will pass on these, thank you anyway, they are a good buy no doubt and im sure someone will snap them up. Thanks .

No worries. I'll carry on tripping over them then...

KermitLeFrog · Post by **KermitLeFrog** » Fri Feb 10, 2017 10:06 am

Harpoon Cans

Sorry for the delay. Minor panic at w*rk.

They came on the bike when I bought it but but they are too loud for me. I've got a couple of DBKillers which will need a bit of grinding to make them fit but I never bothered. I fitted standard cans which (shock horror) I prefer.

Paultandy · Post by **Paultandy** » Fri Feb 10, 2017 10:17 pm

Mac I will av them at £70. pm me pal

Paultandy · Post by **Paultandy** » Sat Feb 11, 2017 7:36 am

MacV2 wrote:
podman wrote:
MacV2 wrote:Just checked them no dents, some scratches but not deep, they just need a very good clean up.

Yes 4 springs needed to hold cans to links, there are a couple of clamps included which might be useable with a good scrub... But springs & clamps cheap enough to buy.

I sold a set of Microns just like these but much cleaner late last year for £150 so these are cheap...Been sitting around for a while unused & unlikly to be used...
Ive studied the pics a little more mate and I think I will pass on these, thank you anyway, they are a good buy no doubt and im sure someone will snap them up. Thanks .
No worries. I'll carry on tripping over them then...

I will have them for £70 pal pm me

MacV2 · Post by **MacV2** » Sat Feb 11, 2017 8:46 am

Sorry Paul the vultures have swooped already on these, already sold i'm afraid...

I've replied to your PM already...

podman · Post by **podman** » Sat Feb 11, 2017 10:05 am

Ive had Kermits ...Thanks everyone.

MacV2 · Post by **MacV2** » Sat Feb 11, 2017 10:13 am

podman wrote:Ive had Kermits ...Thanks everyone.

StormyRob · Post by **StormyRob** » Sat Feb 11, 2017 1:42 pm

MacV2 wrote:Sorry Paul the vultures have swooped already on these, already sold i'm afraid...

I've replied to your PM already...

Enter the vulture

VTR1000.ORG

Race Cans wanted, please.

Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.

Re: Race Cans wanted, please.