Top front engine mount bolt.

[MacV2]

So if anyone happens to have a genuine top front engine mount bolt c/w the spacer for the left hand side, the nut & adjuster doh dah they want to part with Mr Vanstub would be most gratefull...

[tony.mon]

To avoid confusion, it's about 340mm long-
Confused of Kemsing

[MacV2]

To avoid confusion, it's about 340mm long-
Confused of Kemsing

[popkat]

Looks cheap enough for new parts, if the spacer is part 19 then it could take a few weeks but the bolt looks to be in stock. you could make or get a spacer made if you know the size for not much.

https://us.fowlersparts.co.uk/parts/510 ... frame-body


.

[MacV2]

Looks cheap enough for new parts, if the spacer is part 19 then it could take a few weeks but the bolt looks to be in stock. you could make or get a spacer made if you know the size for not much.

https://us.fowlersparts.co.uk/parts/510 ... frame-body


.

Cheers Poppers..

We used a wheel spacer ground down to fit nice & tight, a gentle hammering with a small hammer, nice snug fit.

[vanstub]

and i also need the 20x77mm adjuster as after plusgas and a bit of heat my 1 snapped in old frame

[MacV2]

and i also need the 20x77mm adjuster as after plusgas and a bit of heat my 1 snapped in old frame

Tks... Gorilla mit's strikes again...