hi from Sweden !
-
- Posts: 15
- Joined: Thu Jun 01, 2017 5:48 pm
hi from Sweden !
Hi guys - just recently registered, but logged on firt time tonight. - im a Swedish petrolhead.. been doing "Everything" imaginable with Engines far to long now. so a final build (who am i kidding) was this monster...
an Crosskart with an -98 VTR Engine attached...
i also run an CBR600F3 with dirttires
an projectbike of an CBR600F3 with 900 éngine, VRf750 swingarm, and cbr1000rr forks
an pitbike.....
an 50cc quad
and a 50cc roadracingproject using a Honda MT-5 aircooled 6speed Engine, with Aprilia RS125 forks, singlesided rear ens an 16" aprilia Wheels
I havee some electrial issues with the VTR - so looking for some help
/ Kristian
an Crosskart with an -98 VTR Engine attached...
i also run an CBR600F3 with dirttires
an projectbike of an CBR600F3 with 900 éngine, VRf750 swingarm, and cbr1000rr forks
an pitbike.....
an 50cc quad
and a 50cc roadracingproject using a Honda MT-5 aircooled 6speed Engine, with Aprilia RS125 forks, singlesided rear ens an 16" aprilia Wheels
I havee some electrial issues with the VTR - so looking for some help
/ Kristian
- Attachments
-
- 22.jpg (87.06 KiB) Viewed 4061 times
-
- 20170526_181239.jpg (323.14 KiB) Viewed 4061 times
-
- 20170523_201740.jpg (1.25 MiB) Viewed 4061 times
-
- 20170409_183010.jpg (1.9 MiB) Viewed 4061 times
-
- 20170331_160959.jpg (1.07 MiB) Viewed 4061 times
-
- 15065022_10154013573064080_281847129_o.jpg (452.02 KiB) Viewed 4061 times
-
- 20170527_114931.jpg (1.59 MiB) Viewed 4061 times
Re: hi from Sweden !
Welcome aboard from Sweden Kristian 
I like what you have been building over the years, especially the VTR kart
Great first post, with photo's too
Chris.

I like what you have been building over the years, especially the VTR kart

Great first post, with photo's too

Chris.
- bigtwinthing
- Posts: 5577
- Joined: Mon Dec 17, 2012 7:52 pm
- Location: Hampshire
Re: hi from Sweden !
Looks Great but Mad. are you bringing it to a Workshop day ?
missing the noise, not the vibes. However never say never!
Re: hi from Sweden !
looks like MadMax's garage, some nice kit there
........ welcome to the club 


AMcQ
- alanfjones1411
- Posts: 2844
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: hi from Sweden !
Hello and welcome to the forum



SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: hi from Sweden !
Hi , keep up the good work !
Re: hi from Sweden !
Welcome to the club fella 

Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: hi from Sweden !
Hello and welcome .
Looks like your a spanner short of a full set so you'll fit rite in here
Looks like your a spanner short of a full set so you'll fit rite in here

- OtterSmacker
- Posts: 21
- Joined: Sat Apr 15, 2017 9:15 pm
- Location: York
Re: hi from Sweden !
Hello and welcome Kristian Hesselmark
Loving your builds, especially the VTR Kart
Funny thing you've done this as me and a mate the other day were talking about shoe-horning a 'Storm engine into his knackered old Husqavarna ride-on mower.


Loving your builds, especially the VTR Kart

Funny thing you've done this as me and a mate the other day were talking about shoe-horning a 'Storm engine into his knackered old Husqavarna ride-on mower.

Re: hi from Sweden !
Hey.
Let's see if we can get this motor singing.

Let's see if we can get this motor singing.

It's not falling off, it's an upgrade opportunity.
Re: hi from Sweden !
Heya
Welcome to the forums 


-
- Posts: 15
- Joined: Thu Jun 01, 2017 5:48 pm
Re: hi from Sweden !
Thanxs guys. - problem i have s that when engaging gear the Engine dies. i have tried the "stand"-connecto- but it will not make ny difference all i have eft to try is the clutch-connector (wires) but cannot seem to find them as we cut a whole bunch of them off. ill post a few more pics for now.
- Attachments
-
- 20170527_114929.jpg (1.56 MiB) Viewed 3943 times
-
- 20170526_181412.jpg (346.13 KiB) Viewed 3943 times
-
- 20170526_181239.jpg (323.14 KiB) Viewed 3943 times
-
- 20170526_181230.jpg (368.33 KiB) Viewed 3943 times
-
- 20170526_173001.jpg (334.48 KiB) Viewed 3943 times
-
- 20170523_201740.jpg (1.25 MiB) Viewed 3943 times
-
- 20170523_201732.jpg (258.31 KiB) Viewed 3943 times
-
- 20170523_201614.jpg (218.57 KiB) Viewed 3943 times