Motorcycle Carb Balancer Gauge..SOLD

[MacV2]

SOLD...As per these...

http://www.ebay.co.uk/itm/Motorcycle-Ca ... SnLmxm8GQA

Complete as stated in discription, tubes, extensions & instructions...

If you don't have the front take off already fitted let me know & I'll chuck in the adapter you need. The only other bits then required is a T-piece to splice in to the vac pipe to the petcock***... & a length of Vac tube, which you can buy from your local motorfactors / car spares shop...& something to cap off the ends of the tubes when finished...I use bolts but Golf tees work as well...

See here for a well written How to Guide... viewtopic.php?f=31&t=18430 ...shame the pic's are not showing...



*** T-piece not required if you have a Scottoiler fitted as you can use the T-piece that the oiler works from.

[KermitLeFrog]

I'll have it, been meaning to get one for ages.

[MacV2]

SOLD

To the Frog of Kemitage...You have PM ribbit ribbit

[KermitLeFrog]

So have you. Many thanks.