New bits coming
New bits coming
Away at work presently but when I get back I will have some tank grip pads, new levers waiting. Also going to have some wrapping done on some body work e.g. tank ...front no board and rear...
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: New bits coming
oh dear another member starting out on the slippery slope which is called stormitus.......
HEY YOU GUYS!!!!!!
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: New bits coming
As Marty said it's starting. Next thing you know you'll have the engine out...
If you don't try you never know if you can do it.
- alanfjones1411
- Posts: 2797
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: New bits coming
There's no hope for you now you've started on the endless modification road.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: New bits coming
Hahaha only a nutter would do that unless it's an absolutely neccessity...StormyRob wrote:As Marty said it's starting. Next thing you know you'll have the engine out...
Normal person...Damm My engine siezed best fit a new one...
Nutter...Damm I think I'll just remove my engine as I really need to paint my frame as it seems like a good idea...
Making up since 2007, sometimes it's true...Honest...
- StormyRob
- Posts: 1565
- Joined: Sat Nov 07, 2015 7:33 am
- Location: Northern Ireland. The place of legend
Re: New bits coming
I have never professed to be normal!MacV2 wrote:Hahaha only a nutter would do that unless it's an absolutely neccessity...StormyRob wrote:As Marty said it's starting. Next thing you know you'll have the engine out...
Normal person...Damm My engine siezed best fit a new one...
Nutter...Damm I think I'll just remove my engine as I really need to paint my frame as it seems like a good idea...
If you don't try you never know if you can do it.
Re: New bits coming
lmao another one heads down the slippery slope indeed lol
the older i get,the faster i was
Re: New bits coming
Cheers....doesn't everyone lol.....only a little up to now
Carbon fender extender
Wheel rim tape
Tinted double bubble
Moto grafix tank pad
Scorpion stainless oval cans (fitted previously)
Winter will bring braided hoses and better pads and maybe replacement wheels or gloss powder coating
Carbon fender extender
Wheel rim tape
Tinted double bubble
Moto grafix tank pad
Scorpion stainless oval cans (fitted previously)
Winter will bring braided hoses and better pads and maybe replacement wheels or gloss powder coating
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: New bits coming
oh dear of dear. get to your doctors asap. try and score some methadone to ween you off of stormitus......VTR3545 wrote:Cheers....doesn't everyone lol.....only a little up to now
Carbon fender extender
Wheel rim tape
Tinted double bubble
Moto grafix tank pad
Scorpion stainless oval cans (fitted previously)
Winter will bring braided hoses and better pads and maybe replacement wheels or gloss powder coating
HEY YOU GUYS!!!!!!
Re: New bits coming
Well that's the grip tank pads and new levers fitted. They look good and are quality bits.....now what to do
- lloydie
- Posts: 20921
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: New bits coming
Ride it ,fill it ,ride it some more
Re: New bits coming
Well yesterday I rode it....filled it up after 112 mile and no fuel light on 16l tank.....rode it quite a bit more
Re: New bits coming
Would do some pics but can't seem to work it out ....will have to try harder
Re: New bits coming
Tapatalk is an easy option mate
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF