Replacement indicators

[VTR3545]

I am looking to change the bikes oem indicators with smaller rear and front although I am considering flush at the front......after thoughts or suggestions on good options....cheers

[StormyRob]

I have little ones front and back.
Front is similar to old fiesta ones.
Rear are arrow shaped.
They're not as visible as standard but I like them. I think Mac was selling a set of the flush fronts?

Sent from my SM-G935F using Tapatalk

[VTR3545]

Smart looking storm.....am thinking of changing my wheels to gold....

[StormyRob]

Smart looking storm.....am thinking of changing my wheels to gold....

While you're at it.....make them six spoke

[VTR3545]

Smart looking storm.....am thinking of changing my wheels to gold....

While you're at it.....make them six spoke

Was thinking about it but not many around really

Sent from my SM-G930F using Tapatalk

[StormyRob]

No definitely not

Was having a look yesterday for someone else and couldn't see a front under 195....unreal

[VTRDark]

Forget 6 spoke as it's more to clean...go Carbon that's my wish anyway. One day eventually I'll have some.

I have the same style flush indi's up front. I'm fed up with them now and going to get some of the following led's for the front:
http://www.ebay.co.uk/itm/MOTORCYCLE-HO ... m6NHiXDTMA

And then the rear's I haven't quite decided yet but it's looking like I may get the following:
http://www.ebay.co.uk/itm/RYDE-LED-REAC ... Sw4hdXIKJOI like the idea that they curl around so can be seen from the side too. It's just a shame that they have a plastic back and not real Carbon fibre.

An led relay will be required to sort out the flash rate.
http://www.ebay.co.uk/itm/For-Honda-VTR ... SwrhBZLaU3

[VTR3545]

Forget 6 spoke as it's more to clean...go Carbon that's my wish anyway. One day eventually I'll have some.

I have the same style flush indi's up front. I'm fed up with them now and going to get some of the following led's for the front:
http://www.ebay.co.uk/itm/MOTORCYCLE-HO ... m6NHiXDTMA

And then the rear's I haven't quite decided yet but it's looking like I may get the following:
http://www.ebay.co.uk/itm/RYDE-LED-REAC ... Sw4hdXIKJOI like the idea that they curl around so can be seen from the side too. It's just a shame that they have a plastic back and not real Carbon fibre.

An led relay will be required to sort out the flash rate.
http://www.ebay.co.uk/itm/For-Honda-VTR ... SwrhBZLaU3

Carbon.....if only .......like the rear indy that your looking at....might have a look at them myself....cheers

Sent from my SM-G930F using Tapatalk

[VTRDark]

Yeh but first you need to decide whether to stick with conventional bulbs or go LED. It wouldn't be the best idea to mix and match. You could use in-line resisters but these are a bit hit and miss and don't work like a dedicated relay does.

[VTR3545]

Yeh but first you need to decide whether to stick with conventional bulbs or go LED. It wouldn't be the best idea to mix and match. You could use in-line resisters but these are a bit hit and miss and don't work like a dedicated relay does.

Yeah will prob stick with bulb as getting some flush indy from MacV2 that are bulb type. Cheers

Sent from my SM-G930F using Tapatalk