Engine cover bolt sizes and others

[sirch345]

I've had very good service from Bolt Base too, after Lloydie recommended them

Chris.

[spawner]

I know its an old post, but just thought I'd add that Iain from Bolt Base will still do the 'set' for £22.15 as I have just purchased them

Contact details are

Iain Sim
Director
Bolt Base Ltd

Tel: 01259 218830
Web: www.boltbase.co.uk
Email: Iain@boltbase.co.uk / sales@boltbase.co.uk

Darren

[StormyRob]

Just sent an enquiry myself. Responded straight away despite time of night!

[StormyRob]

Hi

I received my bolts recently and happily threw on the caliper bolts replacing the torx ones and the fork pinch bolts.
I'd like a set of fairing bolts and wondered if anyone knew the spec for them? Have searched the forum and read this thread through but there is only a vague description of them.

Thanks in advance

[VTR Phoenix]

Hi

I received my bolts recently and happily threw on the caliper bolts replacing the torx ones and the fork pinch bolts.
I'd like a set of fairing bolts and wondered if anyone knew the spec for them? Have searched the forum and read this thread through but there is only a vague description of them.

Thanks in advance

I got a set but off the top of my head cant remember where from although I still have the box, fitting instructions and possibly the invoice I can dig out when I get home.

[StormyRob]

Fantastic Paul.

Sure I will see tomorrow!

Thanks
Rob

[agentpineapple]

for anyone interested in ordering a set of lhs/rhs engine case bolts including waterpump
I've done some searching online and I've got the price down to £73.40 for taper head ti bolts. ok it's a lot more than stainless steel, but hey ti isn't cheap bitches....
here's the info I've put together

plain ti M6 taper head

3 x 65mm £12.30........http://www.ebay.co.uk/itm/QUAD-TRIKE-BI ... 2749.l2649
2 x 60mm £6.28..........http://www.competitionfasteners.com/
1 x 50mm £2.58..........http://www.competitionfasteners.com/
8 x 45mm £19.04........ http://www.competitionfasteners.com/
6 x 40mm £13.99.........http://www.ebay.co.uk/itm/M6-Titanium-B ... 2749.l2649
8 x 30mm £13.36.........http://www.competitionfasteners.com/
1 x 20mm £1.62.......... http://www.competitionfasteners.com/
competition fasteners do charge postage £3
29 bolts for a total of £73.40

or you can buy the same kit from probolt for £190......
https://www.pro-bolt.com/titanium-engin ... orm-4.html

[tony.mon]

So, Marty, you weight saving now?
How's the carbon fibre topbox coming along?

[agentpineapple]

So, Marty, you weight saving now?
How's the carbon fibre topbox coming along?

hahahahahaha
working on it mate..........

[Kev L]

Just a thought, there may be alternative weight saving options available! Xxxxx

[agentpineapple]

Just a thought, there may be alternative weight saving options available! Xxxxx

I have no idea what you are talking about....

[Kev L]

More air in the tyres of course!!

[agentpineapple]

More air in the tyres of course!!

i'm already ready running 0psi front and rear, well that's what it looks like when I sit on the bike......

[Geeman]

Hi there
I have just had a set of engine casing bolts for my Storm.
both engine casings...including water pump...clutch slave cylinder...sprocket cover...tank bolts...left and right handlebar...switches etc...clip on bolts...only thing is they didnt come with washers so i bought some black stainless washers...all the lot for £27 including postage from T and G Performance on ebay. Look really niced and they polish up great on the buffer.
cheers

[StormyRob]

Got a load of bolts from Iain at boltbase quite a while ago and thought I'd do it again so just sent the order this minute.
Thought I'd comment as it may encourage others