Side stand loose

[podman]

Just about to set off for a few days in Wales and noticed one of the side stand bolts is loose and wont do up. Should there be a nut behind it or has the thread gone do we think? Thanks all.

[MacV2]

If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.

[podman]

If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.

Thats brilliant mate. Thanks very much. Its bolt 15 from B) fiche thats loose, it wont unscrew so maybe the nuts just slackened off....if not that and the perhaps the part No 19 pin dowel has gone awol..In Wales now so will have a look in the morning, had a fantastic trip up.

[podman]

If you look at these fiche pics you'll see that the Side stand mounting plate bolts on to one of the engine plates...

A/
https://www.ronayers.com/oemparts/a/hon ... 3324/stand

B/
https://www.ronayers.com/oemparts/a/hon ... k-absorber

In B/ pic No.15 passes all the way through with the nut on the far side. That bolt is not on the A/ fiche pic...

IIRC the bolt No.6 in A/ is threaded into the plate No.2 in B/

Hope that helps.

Mac, do you or anyone else have a spare of this bolt 15 from the B) fiche and its matching nut, please.

Mine will get to a certain tightness and then slacken off again, so the thread is buggered on one or most likely both the bolt and nut now.

Much appreciated.

[MacV2]

Possibly but I will have to have a rake tomorrow...

I had all the bikes pulled out today...

If you had posted this a AM instead of PM I could have already told you yeah or neigh...

I'll pop one off another bike & see if I have a match...

[VTRDark]

Possibly but I will have to have a rake tomorrow...

Don't forget to mow the lawn too

[MacV2]

Possibly but I will have to have a rake tomorrow...

Don't forget to mow the lawn too

Did that on Thursday, smarty pants...well more like lowering the weeds TBH...

[MacV2]

Dons a brown robe, waves hand in a circular motion & utters the words...






Obi Wan Kfrankie...

[podman]

It is Obi Wan...Please send to me in the Millennium Falcon at light speed...

Thanks mate.

[MacV2]

It is Obi Wan...Please send to me in the Millennium Falcon at light speed...

Thanks mate.

Snail it is mail you for...