anybody got a set of Apriia pegaso.millie,tuono discs, poss even ducati discs might be the same? as long as they arnt deep dish units.. 320mm perrlease.
i dont wana go spending the kids money on new ones incase this doesnt work
god dont ask lol
discs wanted
Moderator: VTRDark
discs wanted
yes yes its not honda discs but i know we have some hoarders .
anybody got a set of Apriia pegaso.millie,tuono discs, poss even ducati discs might be the same? as long as they arnt deep dish units.. 320mm perrlease.
i dont wana go spending the kids money on new ones incase this doesnt work
god dont ask lol
anybody got a set of Apriia pegaso.millie,tuono discs, poss even ducati discs might be the same? as long as they arnt deep dish units.. 320mm perrlease.
i dont wana go spending the kids money on new ones incase this doesnt work
god dont ask lol
the older i get,the faster i was 
-
alanfjones1411
- Posts: 2844
- Joined: Thu May 21, 2015 3:33 pm
- Location: watford
Re: discs wanted
Ducati 916/996 discs are 320mm with a 10mm offset.They were on my storm anyway.Perhaps Mac will check as he has the bike now.
SO WHEN DOES THIS OLD ENOUGH TO KNOW BETTER KICK IN
Re: discs wanted
happy days that sounds like a planalanfjones1411 wrote: ↑Tue Jan 01, 2019 11:54 am Ducati 916/996 discs are 320mm with a 10mm offset.They were on my storm anyway.Perhaps Mac will check as he has the bike now.
the older i get,the faster i was
Re: discs wanted
happy days Al. centre bore, bolt to bolt and that will confirm if theres any differences to what macs given me incase they changed at some point
the older i get,the faster i was
Re: discs wanted
quick measurements
offset = 5mm
centre hole = 64mm dia
bolt pattern . = 6 x 8mm dia on an 80mm PCD
offset = 5mm
centre hole = 64mm dia
bolt pattern . = 6 x 8mm dia on an 80mm PCD
AMcQ
Re: discs wanted
cheers Al, well i hope iv got my measurments right cause i just bought a set of second hand ones, they are wave discs,not really in keeping but they are cheap so couldnt pass them up..if your selling those spacers i might be interested but will know when they get here.
the older i get,the faster i was
Re: discs wanted
the brembo discs are not wavy, and they are spare, so if you want to have a more classic look give me a shout.
i took them off my bike as a test to see if they were the source of my front end clunk/judder when braking at low speed. the runout is well inside specification, but when i fitted new galfer discs the clunk was gone!!
but if you want to try them and see if they are OK on your bike then if they are OK we can do a deal.
i took them off my bike as a test to see if they were the source of my front end clunk/judder when braking at low speed. the runout is well inside specification, but when i fitted new galfer discs the clunk was gone!!
but if you want to try them and see if they are OK on your bike then if they are OK we can do a deal.
AMcQ
Re: discs wanted
happy days Al. il see when these ones come and use them as a test to see whats required to get them fitted and let you know
the older i get,the faster i was