Frame and engine wanted

Moderator: VTRDark

Post Reply
hawky
Posts: 26
Joined: Sat Aug 27, 2011 2:40 pm
Location: Berkshire

Frame and engine wanted

Post by hawky »

Frame and engine wanted for project build.
Will also require a tank and loom.
Please get in touch should you have anything suited.
Thanks
tony.mon
Posts: 16147
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Frame and engine wanted

Post by tony.mon »

So you got a pair of wheels cheaply?

:lol:
It's not falling off, it's an upgrade opportunity.
User avatar
MacV2
Posts: 17806
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Frame and engine wanted

Post by MacV2 »

Wouldnt you be better off buying a cheap compleat bike, use what you want & sell the rest on...
Making up since 2007, sometimes it's true...Honest...
User avatar
MacV2
Posts: 17806
Joined: Sun Jan 21, 2007 12:07 pm
Location: Grain

Re: Frame and engine wanted

Post by MacV2 »

Making up since 2007, sometimes it's true...Honest...
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Frame and engine wanted

Post by StuartWags »

i have a frame and V5, a dent free tank and a few other bits
hawky
Posts: 26
Joined: Sat Aug 27, 2011 2:40 pm
Location: Berkshire

Re: Frame and engine wanted

Post by hawky »

I’m simply looking for the chassis and motor to build around and have a project keeping me busy for a year or so.

Will be fitting a radial front and different rear end and so on
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Frame and engine wanted

Post by StuartWags »

StuartWags wrote: Wed Mar 06, 2019 6:41 am i have a frame and V5, a dent free tank and a few other bits
Up date

Swing arm with a deep score where chain was thrown but could be useful.

An engine that was a runner but the thrown chain broke the lugs of the chain cover but i would imagine in is
repairable. There has been some subsequent cannibalisation so the clutch cover has gone, the heads have no valves. Probably a few other odds and sods. The crankcase and gear box has not been disturbed

I have a loom but from memory the front and rear light plugs have been removed. So probably not an issues for a radical custom build

The frame has a small dent where lloydie missed the central engine mounting bolt while beating it with a hammer to remove it. Ok to fill if you are going with a painted frame

The tank is dent free and had the paint scraped off to prove it. Rust free

I would have to put in a lot of time to make some money out of this lot and personally i would rather have the space back.

If it is of any interest to you offer me a few quid and it could be yours. Located near Peterborough
tony.mon
Posts: 16147
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Frame and engine wanted

Post by tony.mon »

StuartWags wrote: Wed Mar 06, 2019 7:47 pm
StuartWags wrote: Wed Mar 06, 2019 6:41 am i have a frame and V5, a dent free tank and a few other bits
Up date

Swing arm with a deep score where chain was thrown but could be useful.

An engine that was a runner but the thrown chain broke the lugs of the chain cover but i would imagine in is
repairable. There has been some subsequent cannibalisation so the clutch cover has gone, the heads have no valves. Probably a few other odds and sods. The crankcase and gear box has not been disturbed

I have a loom but from memory the front and rear light plugs have been removed. So probably not an issues for a radical custom build

The frame has a small dent where lloydie missed the central engine mounting bolt while beating it with a hammer to remove it. Ok to fill if you are going with a painted frame

The tank is dent free and had the paint scraped off to prove it. Rust free

I would have to put in a lot of time to make some money out of this lot and personally i would rather have the space back.

If it is of any interest to you offer me a few quid and it could be yours. Located near Peterborough
Thats nearly a bike....
A few bits and it's on the road in time for summer.
It's not falling off, it's an upgrade opportunity.
StuartWags
Posts: 976
Joined: Mon Nov 14, 2011 2:00 pm
Location: Whaplode Drove, Lincolnshire

Re: Frame and engine wanted

Post by StuartWags »

I don't need another project at the moment hence i would rather have the space
seems a shame to bin it
User avatar
Red3446
Posts: 70
Joined: Thu Oct 27, 2016 11:33 am
Location: Italy

Re: Frame and engine wanted

Post by Red3446 »

Engines and other parts are available from Italy :wink: :

http://www.vtr1000.org/phpBB3/viewtopic ... fcb559777f
Post Reply