quickshifter

[fabiostar]

ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me

[Kev L]

Oh my god!! good luck.

[fabiostar]

Oh my god!! good luck.

yeah Kev what could possibly go wrong

[Kev L]

[fabiostar]

i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard.

[MacV2]

i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard.

Have you tried contacting the makers...healtech isn't it...

[fabiostar]

i have actually finished the internet, no really iv read every word written about storms and shifters and no two are the same nor is there a simple ,do this answer? sweet jesus finding out were two green wires go to cant be that hard.

Have you tried contacting the makers...healtech isn't it...

yeah that confused things even more

[tony.mon]

Installation guide, Healtech QS1:

Step One: Just connect some wires, try it.
Step Two: If your gearbox ceases to work, fit replacement gearbox from spare bike, switch wires to somewhere else and repeat steps 1 and 2 until satisfied, or until Mac runs out of spare gearboxes.

Hope that helps

[tony.mon]

There are several YouTube videos, try watching those.
Or funny cats, that will take your mind off it.

[fabiostar]

[quote=tony.mon post_id=480934 time=1581790220 user_id=2119]
There are several YouTube videos, try watching those.
Or funny cats, that will take your mind off it.


[/quotid be better watching funny cats cause i can find shifters fitted to all manner except an actual storm .

iv been trying to find two people who say the same way of fitting them ,so far the closest is

into the coils, not sure on colour of wire to cut into.
into the pulse generator wires, does it matter which wire goes to which?
into the loom at the ECU end of things,lord knows which of those wires?

wiring diagrams from healtech? none the wiser

youtube has eveybike under the sun except?? yup you guessed it

[sirch345]

ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me

A good job my memory is working

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.

[fabiostar]

ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me

A good job my memory is working

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.

happy days chris. well iv got mine wired in, is it right? il find out when it bursts into flames . once the sensor wire arrives il go try it and that will tell the tale

[tony.mon]

Have you got the phone app downloaded and paired so that you can set it up?
I'd suggest long cut periods at first.

[sirch345]

ok peps iv got a healtech shifter here, no instructions and if you showed me a wiring diagram it wouldnt help as they make little or no sense to me.
has anybody fitted one and remember how they wired it.
from the unit i have 4 wires,
a red... i take it i run that to a live feed.
a black, thats my earth.

but iv two green wires that goes to the coil feeds. which feeds??

anybody done this mod so i dont wreck all round me

A good job my memory is working

Micky (mik_str) fitted one to his Storm. Here's the link:- viewtopic.php?f=9&t=41842&p=455879&hilit

Chris.

happy days chris. well iv got mine wired in, is it right? il find out when it bursts into flames . once the sensor wire arrives il go try it and that will tell the tale

Fingers crossed and everything else it all goes well Rob

Chris.

[fabiostar]

well it didnt burst into flames, i wired it into the pulse coil wires and tried it this morning, downloaded the app and the bikes running fine and the app shows the same revs as my rev counter so alls good so far.

@tony , atm iv not touched the settings iv just left them as they were on the other bike so il see if that suits mine.

Rob de Hoo is sending me a new sensor wire so soon as that arrives il see if it all works