Intro

[KevA]

Hi all,
Not got a VTR but a customer asked me to fabricate various pieces of metal to form side panniers to fit his top box and I fancied posting pictures of the finished article which came out rather nice imho.
I'll locate the right section and post up for laughs

[Dickiebig]

Post away, nobody on here would ever take the p@@s!!!!

[Wicky]

nobody on here would ever take the p@@s!!!!

http://www.corbin.de/honda/BeetleBags/VTR-BAG.html

[sirch345]

Hi all,
Not got a VTR but a customer asked me to fabricate various pieces of metal to form side panniers to fit his top box and I fancied posting pictures of the finished article which came out rather nice imho.
I'll locate the right section and post up for laughs

I'll be interested to see what you fabricated

Chris.

[KevA]

A couple of quick shots.
Just to say the customer wanted the oem indicators leaving in place.

[sirch345]

You certainly filled the customers brief, well done

If it were my bike I'd want the indicators in a position where they would be more visible from behind,

Chris.

[tony.mon]

Do you have a shot from behind? They look huge from this angle and seem to cut lean angle.
Might just be the angle of the shot, though.

[KevA]

This one was in the development stage.



Added these LED strips as additional Turn Signals as the oem ones are well hidden.

[KevA]

You certainly filled the customers brief, well done

If it were my bike I'd want the indicators in a position where they would be more visible from behind,

Chris.

Thanks Chris

[nigelrb]

Stuff the bike - that's a magic little workshop going on there!!

[KevA]

Stuff the bike - that's a magic little workshop going on there!!

Thanks Nigel, It's getting there slowly.
8x8x40ft shipping container