Lloydie’s blade
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Lloydie’s blade
I am gutted for sure .
I’m going to send the yokes and legs to motoliner to get them straitened as it’ll be 1/4 of the cost of replacing them .
I’m going to send the yokes and legs to motoliner to get them straitened as it’ll be 1/4 of the cost of replacing them .
Re: Lloydie’s blade
Good call 
Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk
Duffy1964
Yellow 1997 Storm R.I.P. Orange 2000 Streetfighter (Rufus), Red & Silver 1968 Triumph Trophy 650, Blue 2003 Storm Project, Red 2007 Montesa Cota Trials 250 & 1959 BSA D7 175cc Bantam Trials Project
Yellow 1997 Storm R.I.P. Orange 2000 Streetfighter (Rufus), Red & Silver 1968 Triumph Trophy 650, Blue 2003 Storm Project, Red 2007 Montesa Cota Trials 250 & 1959 BSA D7 175cc Bantam Trials Project
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Lloydie’s blade
another thumbs up for motoliners from me. they did the one fork tube on the express after the ditch incident in devon, only cost £30 ish iirc
HEY YOU GUYS!!!!!!
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Lloydie’s blade
agentpineapple wrote: ↑Tue Sep 14, 2021 4:24 pm another thumbs up for motoliners from me. they did the one fork tube on the express after the ditch incident in devon, only cost £30 ish iirc


Re: Lloydie’s blade
what sorta yokes are you using lloydie? iv a set of gullwing black yokes here, il need to check if they are for rwu or upside downers 

the older i get,the faster i was 

Re: Lloydie’s blade
i found these ones but turns out they are 50mm so are up side downers

the older i get,the faster i was 

- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Lloydie’s blade
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Lloydie’s blade
Front end rebuilt with new springs ,seals,bushes and oil .
Swing are refitted , rear shock boxed up ready to send of next week to nitron for a service and new spring .
Like a silly tw@ I knocked over the bottle of fork oil so had to pop to Ducati to get another as they’re the only ones in the area that stick the same brand as the one I had .
I had to be dragged out as I was about to buy a 2019 monster (in yellow)
.now back at home glad I didn’t lol .
Swing are refitted , rear shock boxed up ready to send of next week to nitron for a service and new spring .
Like a silly tw@ I knocked over the bottle of fork oil so had to pop to Ducati to get another as they’re the only ones in the area that stick the same brand as the one I had .
I had to be dragged out as I was about to buy a 2019 monster (in yellow)
Re: Lloydie’s blade
Looking good Lloydie
That frame has some large beam
Chris.

That frame has some large beam

Chris.
Re: Lloydie’s blade
Top work Lloydie! Ticking off the important jobs
(Please don't polish it
)

(Please don't polish it

Jamie 

Re: Lloydie’s blade
I'm still trying to workout what this colour scheme is going to be

Chris.
Re: Lloydie’s blade
Just don't try to polish the rims on your carbon wheels, Lloydie...
It's not falling off, it's an upgrade opportunity.