Hi from Reading
- Commando77
- Posts: 199
- Joined: Sun Oct 08, 2017 10:35 pm
- Location: Fleet, Hampshire
Re: Hi from Reading
No you didn't, it was slipped in there by the workshop fairy!
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Commando77 wrote: ↑Wed Feb 08, 2023 5:55 pm No you didn't, it was slipped in there by the workshop fairy!
![Laughing :lol:](./images/smilies/icon_lol.gif)
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Fitted a radial M/C from a Kawa Z1000SX today, with new Venhill brake lines and fresh fluid.
Was going to fit a braided clutch line, but ran out of brake fluid...so that'll be tomorrow's job
![Image](https://am3pap003files.storage.live.com/y4m3nPw35AtEDPFsJ-zrHrCueJGXqZ6yxrd4fo9I_3-tW0IazXZuyjvqJk_-uAAVDvROe8GUvbuhHUwwi8YZcgtvW3OdeftYO1qHQo7rwaUSkhwKZmU3h3D_XU49syZyBDyzGJIu5iuscsEN4gfcMapOtCGsgbfBKpPwBXvN4Ona5b9SPx-Ggi-arI88l7mztnM?width=3000&height=4000&cropmode=none)
![Image](https://am3pap003files.storage.live.com/y4mUpxHKeVu3e_tVRUgzuZTbGwRRRhO-wlv4Vl7QsQP6unsBxF3w0JN_VUBGK5kDpvrMEVwj-7jBMtRuRgRqhlpcgslE5E9uO6PdmhmILu88XgIdNG4yB34wd6ugJRnWOoZnnDXVQN0cFr_39pGzx3KA5ggt38Xg3rnFLxIpbFZcZ6-L8_V9s-ohHuuMKxNCAc_?width=4000&height=3000&cropmode=none)
Was going to fit a braided clutch line, but ran out of brake fluid...so that'll be tomorrow's job
![Smile :)](./images/smilies/icon_smile.gif)
Last edited by purgeraptor on Sun Mar 05, 2023 3:21 pm, edited 1 time in total.
Re: Hi from Reading
Don't expect any difference after fitting a braided clutch line.
With brakes the line has to stand high pressures without ballooning, but the clutch line simply moves fluid from the master to the slave, so doesn't build up any pressure. Looks better, though.
With brakes the line has to stand high pressures without ballooning, but the clutch line simply moves fluid from the master to the slave, so doesn't build up any pressure. Looks better, though.
It's not falling off, it's an upgrade opportunity.
Re: Hi from Reading
I'll be interested to hear your opinion on the radial M/Cyl when you get out on the roadpurgeraptor wrote: ↑Wed Feb 22, 2023 4:37 pm Fitted a radial M/C from a Kawa Z1000SX today, with new Venhill brake lines and fresh fluid.
Was going to fit a braided clutch line, but ran out of brake fluid...so that'll be tomorrow's job![]()
![]()
![Very Happy :D](./images/smilies/icon_biggrin.gif)
Chris.
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Will do Chris ![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Agreed.tony.mon wrote: ↑Wed Feb 22, 2023 8:22 pm Don't expect any difference after fitting a braided clutch line.
With brakes the line has to stand high pressures without ballooning, but the clutch line simply moves fluid from the master to the slave, so doesn't build up any pressure. Looks better, though.
Doing it mainly to replace the 22 year old rubber line, but it will look a little better too
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
HEL clutch line fitted. Was a spare from my old Hack ZZR11 which blew its gearbox a few years back.
Bled fine with my compressor-powered quick bleeder thing.
Next job probably a braided rear brake hose.
Have also bought a black 'replica' clutch lever on eBay to match the black Z1000SX front brake lever.
Will only fit it if it's not junk quality, but at £12 delivered, it probably will be![Laughing :lol:](./images/smilies/icon_lol.gif)
That's it all done until I get to ride it, unless anyone can think of anything else worth doing?
![Image](https://am3pap003files.storage.live.com/y4mGgcEkHMuoNlYsiIF9goQwMEn_-TB2Vnm3v3AetIPMPrGaRcxEJSlV3EZyZyS-2kSMKUbouTe_jnshvi5iRZ_Npu5P9mXujqXkLAhnYQCEN43IravFm2YjxnZxof72iOv4UVi2LY08tM9m6jen1vbhJpN7dIe643-Si98H6cYdH5446Lv4u5wKrzNQPagurEr?width=4000&height=3000&cropmode=none)
![Image](https://am3pap003files.storage.live.com/y4mD8Ouj4IQ03uboPgSD_snWPTIb_Jt9hXzUYIfH2CeC5EwmDBaTpAPy2N6W0koRv40OJhAalVDOMOKBtn2MRjDkacsqYBj4g-dWt3D5bQGAQQlB9audYonlfF3-AvAr84Y6C7_UNW8AM9GVBaxVGaMgp2PRgo8qtNzj-7wxsDADplRpxE_ivGXWqLmROUv0Slb?width=3000&height=4000&cropmode=none)
Bled fine with my compressor-powered quick bleeder thing.
Next job probably a braided rear brake hose.
Have also bought a black 'replica' clutch lever on eBay to match the black Z1000SX front brake lever.
Will only fit it if it's not junk quality, but at £12 delivered, it probably will be
![Laughing :lol:](./images/smilies/icon_lol.gif)
That's it all done until I get to ride it, unless anyone can think of anything else worth doing?
Re: Hi from Reading
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Good work with the replaced clutch line
![Cool 8)](./images/smilies/icon_cool.gif)
Chris.
Re: Hi from Reading
A cheap cosmetic mod. Buy yourself some stainless dome nuts to hold the mirrors on. You can see them when riding, and the painted ones you have with flaking paint let the view down a bit.purgeraptor wrote: ↑Thu Feb 23, 2023 2:45 pm
That's it all done until I get to ride it, unless anyone can think of anything else worth doing?
It's not falling off, it's an upgrade opportunity.
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Like that idea, will dotony.mon wrote: ↑Thu Feb 23, 2023 10:21 pmA cheap cosmetic mod. Buy yourself some stainless dome nuts to hold the mirrors on. You can see them when riding, and the painted ones you have with flaking paint let the view down a bit.purgeraptor wrote: ↑Thu Feb 23, 2023 2:45 pm
That's it all done until I get to ride it, unless anyone can think of anything else worth doing?
![Thumbup :thumbup:](./images/smilies/icon_thumbup.gif)
Few other cosmetic jobs need doing, like the engine casing paint in places.
I did remove the 'Wear a helmet' and 'Use unleaded' stickers' from the tank yesterday. That'll upset The Purists
![Very Happy :D](./images/smilies/icon_biggrin.gif)
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Cheap eBay black clutch lever fitted.
Looks to be OK quality and fitted well.
All is good, unless it snaps off after a few applications
![Image](https://am3pap003files.storage.live.com/y4ms2c0EtzACBLyrBqi1540hT3CAB-7gbJjlgmd014p3uBh__Vfq7EzwFMilfq96PgcKPjNK5IAn3qog6bWPazdDBi_vYo4dZ-KJRcmFFVsT-vupHWP5dqxDS6DMlTP4vUU7edxW8kMkatrkPUh5xhYV6JHxQ6MOOvJBPjZh17lHu8Ol0LX-9i2BjoT9SZMh2qd?width=3000&height=4000&cropmode=none)
Looks to be OK quality and fitted well.
All is good, unless it snaps off after a few applications
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: Hi from Reading
After Tony's suggestionpurgeraptor wrote: ↑Fri Feb 24, 2023 9:34 amLike that idea, will dotony.mon wrote: ↑Thu Feb 23, 2023 10:21 pmA cheap cosmetic mod. Buy yourself some stainless dome nuts to hold the mirrors on. You can see them when riding, and the painted ones you have with flaking paint let the view down a bit.purgeraptor wrote: ↑Thu Feb 23, 2023 2:45 pm
That's it all done until I get to ride it, unless anyone can think of anything else worth doing?
![]()
Few other cosmetic jobs need doing, like the engine casing paint in places.
I did remove the 'Wear a helmet' and 'Use unleaded' stickers' from the tank yesterday. That'll upset The Purists![]()
![Laughing :lol:](./images/smilies/icon_lol.gif)
Or these:
https://www.ebay.co.uk/itm/M6-Flanged-D ... ect=mobile
Good luck with the new clutch lever,
Chris.
- purgeraptor
- Posts: 138
- Joined: Thu Nov 10, 2022 8:24 am
- Location: Reading UK
Re: Hi from Reading
Cheers.
I'm going to try the stainless DIN M6 dome nuts without the flange.
Can always bung a washer underneath if needed.
£3.73 including delivery for a pack of 10 from Bolt-World on eBay.
I'm going to try the stainless DIN M6 dome nuts without the flange.
Can always bung a washer underneath if needed.
£3.73 including delivery for a pack of 10 from Bolt-World on eBay.
Re: Hi from Reading
You don't need a flange.
Flanges weigh more...
Flanges weigh more...
It's not falling off, it's an upgrade opportunity.