General consensus on exhaust manufacturers?

General Bike chat
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

General consensus on exhaust manufacturers?

Post by Virt »

I'm on my lunch break and looking through exhaust systems available for the firestorm on eBay.. What manufacturers are good to go with and which ones are best to avoid, in terms of quality not sound?

I've found loads by MTC but I've never really heard of them, and some of them do look quite nice. Dunno about their sound yet as that will have to wait until I get home :lol:

I know to avoid DanMoto's, and since I personally dislike SP engineerings' sound I'll avoid them too. Who else?

Thanks :D
Slowly approaching the more bikes than birthdays achievement
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

General consensus on exhaust manufacturers?

Post by lloydie »

Good ones I know off are as I e had them .
Quill
Arrow
Leo vince
Scorpion
And the only ones I've had that didn't think we're up to much was ART
Felt cheap and were very loud even when repacked !!
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: General consensus on exhaust manufacturers?

Post by Virt »

Scorpions and Leo Vinces are nice yes, obviously heard them on your bike and someones' R6 down at the pitstop the other week. PHWOAR! There is a set on eBay I really like but obviously it's gonna be a couple of months of saving up for them, and I only want one exhaust (similiar to how the hornets' exhaust is. Very high up and on the right) so then what do I do with the left one? And will I be able to use any old firestorm high level link pipes to fit them? Cause if I recall correctly Scorpion do a set of high level cans with link pipes but I dunno...
Slowly approaching the more bikes than birthdays achievement
User avatar
agentpineapple
Posts: 15124
Joined: Sat Mar 26, 2011 9:16 pm

Re: General consensus on exhaust manufacturers?

Post by agentpineapple »

two brothers are quality, also akra's.
if you have enough cash you can even get termignoni's.
HEY YOU GUYS!!!!!!
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: General consensus on exhaust manufacturers?

Post by Virt »

bigspanishmarty wrote:if you have enough cash
I'm an apprentice, I'll be skipping out on a months' worth of food as it is just to get ANY pipes :lol: Kind of wanting to stick the sensible amount. Theoretically under £650 or so :lol: Preferably under £500.. I do like my food :(
Slowly approaching the more bikes than birthdays achievement
User avatar
AMCQ46
Posts: 16742
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: General consensus on exhaust manufacturers?

Post by AMCQ46 »

i am happy enough with my Viper pipes and they did come with dB killers which can help on track days
AMcQ
Gazfirestormowner
Posts: 479
Joined: Wed Apr 10, 2013 10:11 am
Location: Rugby warickshire

Re: General consensus on exhaust manufacturers?

Post by Gazfirestormowner »

Not sure how old this advert is but seem cheap
http://www.preloved.co.uk/adverts/show/ ... storm.html
User avatar
AMCQ46
Posts: 16742
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: General consensus on exhaust manufacturers?

Post by AMCQ46 »

the student option is to drill out the baffles, it sounds very good and costs nothing.........the only down side is the weight of the cans compared to race cans, but it looks standard and sounds nice :thumbup:
AMcQ
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: General consensus on exhaust manufacturers?

Post by Virt »

Not 100% sure on Remus cans really. Plus it says high level but only shows one exhaust and no pipes, not really sure about the legitimacy of the ad :confused

I'm thinking of the bafflectomy modification to last me until my restrictors disintegrate in the fiery depths of my err... Carbs. But when it disintegrates I want something to make me stand out more. I love the sound of the firestorm, but it does sound like a sewing machine that overdosed on Steroids sometimes :lol:
Slowly approaching the more bikes than birthdays achievement
User avatar
AMCQ46
Posts: 16742
Joined: Mon May 11, 2009 4:54 pm
Location: Worcestershire / Warwickshire border

Re: General consensus on exhaust manufacturers?

Post by AMCQ46 »

the full baffle removal sounds very good.........i only changed to race cans for less weight and better looks, but I still prefer the sound from the modified standards. both the bass and the volume were just right
AMcQ
User avatar
bazza696
Posts: 1982
Joined: Mon Aug 10, 2009 12:54 pm
Location: Witham, Essex

Re: General consensus on exhaust manufacturers?

Post by bazza696 »

vipers are a good price, I only hate the ones I have cause they are ally and a cow to keep polished.

Just repacked them, and never again, trying to get the end caps in was a bugger and that was the easy part.

I seen them for £250 on ebay from a trader, piper worx are around £330, or Ti cans for just over £400
Image
User avatar
Kev L
Posts: 11286
Joined: Tue Aug 24, 2010 9:57 pm
Location: Hertford, England

Re: General consensus on exhaust manufacturers?

Post by Kev L »

Remus were the item of choice when Honda produced the Anniversary edition so I would imagine they are reasonable quality.
My Scorpion High level oval carbon fibres were £230 off the Bay when I first got the bike a couple of years back -

Image

Image

They were second hand but in really good nick. I am well plleased with them, with or without baffles.
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Virt
Posts: 6793
Joined: Wed Dec 12, 2012 12:35 pm
Location: Leicestershire

Re: General consensus on exhaust manufacturers?

Post by Virt »

Guess I'll have a looksie at some Vipers then on the Tube of You and the FleaBay...

Kev, I'm confused. By baffles do you mean hearing aids? As in baffled exhaust = no hearing aid and vice versa? :confused :confused
Slowly approaching the more bikes than birthdays achievement
User avatar
darkember
Posts: 2194
Joined: Wed Sep 08, 2010 10:48 pm
Location: South Wales Abergavenny

Re: General consensus on exhaust manufacturers?

Post by darkember »

Definitely I can confirm that Scorpions are nice & well made, have them on this bike & had them on my previous B1200. I have also heard that Beowulf make decent systems as well.

http://www.beowulfuk.com/
User avatar
chric
Posts: 2763
Joined: Sun Nov 27, 2011 2:23 pm
Location: UK

Re: General consensus on exhaust manufacturers?

Post by chric »

Image

thats the same remus best cans ive had sound loud but not over loud
carbon can co-tinny
blueflame-over loud
arpone?-scrathed frame but sounded nice
Ill never be a sell out storm forever
Post Reply