Pimp.... As good as I get

[Jvid]

All

I am totally useless when it comes to bikes and the poor wife has to put up with my mods. My abilities stretched to new levers and rim tape. Sometimes I'm just too good?



[URL=http://s1344.photobucket.com/user/ ... .jpg[/img][/url]

I do want some cans and probably need to get the cct looked at but I'll have to go and have a word with my mate for that.

[Jvid]

Now for my best work yet

[URL=http://s1344.photobucket.com/user/ ... .jpg[/img][/url]

[agentpineapple]

blimey your headers are clean and shiny..........
nice bike dude.

[Teach72]

Nice! Wanna come and do mine?

[VTRDark]

It's not his bike.

Who does the cleaning then Jvid. It does look nice and clean. With regards to CCT's don't replace the original Honda autos with new ones. Either do the stop mod or replace with manuals.

(:-})

[Foxy vid vtr]

It's not his bike.

Who does the cleaning then Jvid. It does look nice and clean. With regards to CCT's don't replace the original Honda autos with new ones. Either do the stop mod or replace with manuals.

(:-})

Your right its not his bike
I'm pretty sure I cleaned it for him last time he borrowed it, and brought it back with splatted flies all over it

[Jvid]

Polishing the tank is not cleaning the bike

In her words..... What's a cct? she dies her hair blonde.

[Virt]

Oh you two are gonna be funny

Cam Chain Tensioner. It Tensions the Chain of Cam or something.

[Foxy vid vtr]

Oh you two are gonna be funny

Cam Chain Tensioner. It Tensions the Chain of Cam or something.

Yes you tell him what it stands for, he doesn't know either he should stick with his Suzuki he wants

[Jvid]

Look foxy you don't know what a razor is....

[URL=http://s1344.photobucket.com/user/ ... .jpg[/img][/url]

[VTRDark]

Basically there is a design fault in the original Honda design. The spring inside is the week point and they can snap/break so fails. This causes the tensioner to loose it's tension to the point of the cam chain going slack enough for timing to go out and valves can hit the piston as it comes up. Not good There is no warning and all one can do is take preventative measures in the form of a fail safe mod on the honda auto tensioners so if it fail it does no damage but will need replacing or go for full manuals and be done with it.

Some links regarding the Cam Chain Tensioners (CCT's)

You can either go for the stop mod http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=19416
Which is the Honda auto CCT's that are converted to a fail safe. So when it does fail, it don't send the valves crashing.

Or

You go for the full manual conversion, your options are here
http://www.vtr1000.org/phpBB3/viewtopic ... 16&t=22720

As for fitting manual see the guide in my signature.

(:-})

[Foxy vid vtr]

He can't even change a lightbulb so I don't think he will be doing this

[leevtr]

Look foxy you don't know what a razor is....

[URL=http://s1344.photobucket.com/user/ ... .jpg[/img][/url]

That's fcukin' rotten

[Dr B1G]

Well, I've just done my MCCT's and the job went very smoothly according to cybercarls directions, very easy to follow, but I wont mention I forgot to refit an important vacuum pipe to the fuel tank

[AMCQ46]

Look foxy you don't know what a razor is....

[URL=http://s1344.photobucket.com/user/ ... .jpg[/img][/url]

I think I could hear the slap from here Brave man, this could be the most fun we've had since Virt joined