VTR1000.ORG

Hi guys

This is my firestorm

Done:

Viper Race Cans
Double Bubble

To Buy:

Hugger, Undertray, Levers, Indicators, Deuville Top Yoke, Black Renthals

To Do:

Seat Cowl, Tank, Front Fairing, Mudguard, Hugger and undertray Sprayed (Colour not known yet)
Frame, Swingarm, Subframe, Fork Bottoms, Yokes Powder Coated Black
Wheels Powder Coated black with edge of rim matching paint work



Will keep it updated

this should be interesting, keep us up to date with lots of pictures....

that's tidy looking.... can I ask why the top yoke change?

Cheers

Yes it's for a set of renthals as the deuville yoke has risers.

You need to make sure that they use the same IIRC 41mm fork diameter otherwise you will have problems clamping the forks in. It will be a good move if it fits.

(:-})

I was going on this old topic that I found.

http://vtr1000.org/phpBB3/viewtopic.php?f=8&t=18325

Argh I missed that one, good find. I just checked and it looks like the Deuville does indeed have the same OM Storm fork diameter of 41mm.

http://www.bikez.com/motorcycles/honda_ ... e_2012.php

Looks like the earlier model are 42mm as well.
http://www.deauvilleuk.org/forum/specs.php

And here's a top yolk
http://www.ebay.co.uk/itm/Honda-NT650V- ... 1c19776ab8
The only other issue you may have is the steering stem, hopefully that will fit straight through and then offcourse the fitting of the ignition barrel.

(:-})

To update this thread it has been confirmed that the deuville yoke does not fit so not a straight swap. The stem hole is 10mm too far forward and does not line up.

http://www.vtr1000.org/phpBB3/viewtopic ... 49#p319143

(:-})