Rear Swinging arm Linkage Bolts

[Duffy1964]

Has any one got the two rear swinging arm linkage bolts that fit through underside of swinging arm?

Mine have seized on my streetfighter project and I had to hacksaw them off.

One goes through the steel linkage and attaches to underside of swinging arm and the other one is the shorter of the two which fits the cast linkage.
A spare steel linkage would be handy too as hacked a bit off mine

I have been on ebay and david silver's site but parts are not in stock.

Hopefully one of you have them knocking about, cash waiting

[VTRPiG]

Hey fella I am in the process of rebuilding my rear end and order new ones. Should still have the originals there, a bit grubby but still intact. Can have a look when I get home to check, they're yours if you still need them.

[Duffy1964]

Top man that would be a great help, was gonna fit new but I didn't know where to get all the parts.
If you find a supplier let me know buddie

[VTRPiG]

If you want new go to http://www.davidsilverspares.co.uk/ and use the search by part number option

You can get the part numbers from http://www.ronayers.com/Fiche/TypeID/26 ... K_ABSORBER

Hope those links work . If you still want the ones I have just let me know and I can drop them in the post for you

[Duffy1964]

Many thanks for the info Dude

I will still have yours if they are still servicable as I have a couple of storms so will be well handy if you don't mind.

Just pm me with cost matey

[VTRDark]

No point in buying new Duffy. Just give older ones a wipe over with some wire wool and grease them up good and proper when putting on the bike.

(:-})

[Duffy1964]

Thanks for the tip Carl I will need a few bits as it had siezed pretty bad though.
At least its apart and ready for paint now