I have on the way a 15 tooth pinion to install in the VTR instead of the stock 16 tooth, and I would like to install a device to correct the speedometer.
I have seen the speedohealer, and the speedoDRD ( hard to find in Europe).
Any other suggestion?
Thanks.
Speedometer correction
-
felix barrao
- Posts: 100
- Joined: Sat Sep 08, 2018 4:20 pm
- Location: Zaragoza ( Spain)
Re: Speedometer correction
Yeah, use a torque marker (paint pen) and mark the needed speed limits on the plastic bezel of the the speedo clock. cheap and simple, works for me.
Like what you do
Do what you like He who wonders isn't always lost
Do what you like He who wonders isn't always lost
-
felix barrao
- Posts: 100
- Joined: Sat Sep 08, 2018 4:20 pm
- Location: Zaragoza ( Spain)
Re: Speedometer correction
Thanks..
Anyway, a speedohealer is on the way...
Anyway, a speedohealer is on the way...
Re: Speedometer correction
I would have recommended a Speedohealer, a nice bit of kit IMHO,
Chris.
-
felix barrao
- Posts: 100
- Joined: Sat Sep 08, 2018 4:20 pm
- Location: Zaragoza ( Spain)
Re: Speedometer correction
Installed today.
Needed a -11% correction to compensate the pinion change and the factory speedometer inaccuracy
Needed a -11% correction to compensate the pinion change and the factory speedometer inaccuracy
Re: Speedometer correction
felix barrao wrote: ↑Tue May 14, 2019 7:02 pm Installed today.
Needed a -11% correction to compensate the pinion change and the factory speedometer inaccuracy
Chris.