where to order ape cct

tonyb · Post by **tonyb** » Thu Apr 08, 2010 9:51 pm

who sells ape manual tensioners in the uk

cheers tony

benny hedges · Post by **benny hedges** » Thu Apr 08, 2010 9:57 pm

cheapest and most helpfull place ive found is http://www.jcmotors.com in the usa.
their price was Â£63 delivered for the pair incl gaskets.
also doing dynojet kits for Â£40 which is 1/2 what you will pay in the uk.

if you are going to order from them, find the part number on the site and then use the instant online support feature to arrange postage as their standard secure delivery costs more than the parts!

i don't know of anyone in the uk with stock atm, sorry

apparently http://www.holeshot-racing.co.uk/ in leeds are a ape stockist but you'd probably have to ring and ask if the can get storm ccts - get the part number for the cct & gasket off ape's site.

*part number is
VTR1000/Superhawk/ Firestorm (2req) - HT1000VTR (tensioner) & EC388 (gasket)
afaik any other 96mm manual tensioner with same gasket will fit the vtr.#
eg cbr600 F3/F4/F4i , cbr900, cbr919, cbr1100 blackbird
don't quote me on that, but if you find a dealer get them to check cos they should be the same part. the length and diameter of the bolt is the same, the hole centres, diameter and offset from centreline are the same.
i'll have a look on silvers and see if the oem cct part number is the same - if so there is no reason you can't widen your search a bit.

14520MBB013 LIFTER ASSY,TENSI *A Part No14520MBB013 PriceÂ£32.00
doesnt say what other models it fits.

http://www.cmsnl.com/honda-vtr1000f-sup ... E++04.html
is the honda fiche showing all the camchain parts and part numbers - note the cct (item 4) shows the earlier part superceded by the part number above, stocked by silvers.
is this an uprated cct that eliminates the breakage issue?

vtrbarmy · Post by **vtrbarmy** » Fri Apr 09, 2010 6:15 am

I need to order some manual CCT's - so just looked on the jcmotors site - can't find the manual CCT's listed anywhere, if I put in my VTR details (1997) doesn't list, if I search directly on the part number ht 1000 vtr - get "no results found" - ditto ec 388.

In fact the only results I get is if I search on Superhawk - but no CCT's shown.

Do you have to ring them and they do a special order????????

Stratman · Post by **Stratman** » Fri Apr 09, 2010 8:52 am

There are sooo many threads on where to buy manual CCT's!

Try Debben Racing

vtrbarmy · Post by **vtrbarmy** » Fri Apr 09, 2010 10:06 am

Stratman wrote:There are sooo many threads on where to buy manual CCT's!

Try Debben Racing

Cheers buddy very much appreciated (with apologies, still finding my way around both this site and the VTR

)

tonyb · Post by **tonyb** » Fri Apr 09, 2010 5:12 pm

already tried debben they dont have any in stock, i ordered some from overstock parts in the US sent them about six emails to see whats going on as its been 4 weeks since i ordered them, they finally got in touch when i lodged a paypall dispute and said they are still waiting for ape to deliver, i have previouslly emailed the guy who made a few sets for other forum members but he's not replying. can anybody confirm if they fit from other models like cbr6 cbr900 cbr1100 as these are available on evilbay
cheers tony

Wicky · Post by **Wicky** » Fri Apr 09, 2010 6:27 pm

Gary from Overstock in Clearwater Florida posted an update yesterday

http://superhawkforum.com/forums/showth ... ape&page=2

Seems there has been a huge demand for Manual CCTs of late

We are shipping as we speak here and APE is sending more out daily. Again I apreciate everybodies patience. If another vendor has stock, they are fortunate.
APE has taken steps to keep more in stock instead of waiting for orders to hit a number then make them.
Gary

Whoa Nelly · Post by **Whoa Nelly** » Tue Apr 13, 2010 7:37 pm

Ordered mine from Gary at Overstock on 31st March - they arrived today

WN!

benny hedges · Post by **benny hedges** » Tue Apr 13, 2010 8:56 pm

i got an email yesterday saying mine had been despatched with the dynojet kit.
bike's not getting built up till ther're done cos it's a lot easier to get at front and back with everything off, fairing, tank, airbox, subframe & hugger etc - got a real good view of ccts so should be easy

tonyb · Post by **tonyb** » Tue Apr 13, 2010 9:00 pm

Whoa Nelly! wrote:Ordered mine from Gary at Overstock on 31st March - they arrived today
WN!

ordered mine on 19th march still not got them

Styler4077 · Post by **Styler4077** » Tue Apr 13, 2010 10:03 pm

Bloody hell so did I (19th)and I'm in the same situation, WTF going on with new orders going out before old order.
Will call Gary again tonight. Pissed

off about this now.

ordered mine on 19th march still not got them

tonyb wrote:
Whoa Nelly! wrote:Ordered mine from Gary at Overstock on 31st March - they arrived today
WN!
ordered mine on 19th march still not got them

Whoa Nelly · Post by **Whoa Nelly** » Tue Apr 13, 2010 10:04 pm

tonyb wrote:
Whoa Nelly! wrote:Ordered mine from Gary at Overstock on 31st March - they arrived today
WN!
ordered mine on 19th march still not got them

Fingers crossed for you Tony. At least it seems more like supply chain incompetence

than unscrupulosity.

bazza696 · Post by **bazza696** » Wed Apr 14, 2010 9:12 am

benny hedges wrote:cheapest and most helpfull place ive found is http://www.jcmotors.com in the usa.
their price was Â£63 delivered for the pair incl gaskets.
also doing dynojet kits for Â£40 which is 1/2 what you will pay in the uk.

if you are going to order from them, find the part number on the site and then use the instant online support feature to arrange postage as their standard secure delivery costs more than the parts!

i don't know of anyone in the uk with stock atm, sorry

apparently http://www.holeshot-racing.co.uk/ in leeds are a ape stockist but you'd probably have to ring and ask if the can get storm ccts - get the part number for the cct & gasket off ape's site.

*part number is
VTR1000/Superhawk/ Firestorm (2req) - HT1000VTR (tensioner) & EC388 (gasket)
afaik any other 96mm manual tensioner with same gasket will fit the vtr.#
eg cbr600 F3/F4/F4i , cbr900, cbr919, cbr1100 blackbird
don't quote me on that, but if you find a dealer get them to check cos they should be the same part. the length and diameter of the bolt is the same, the hole centres, diameter and offset from centreline are the same.
i'll have a look on silvers and see if the oem cct part number is the same - if so there is no reason you can't widen your search a bit.

14520MBB013 LIFTER ASSY,TENSI *A Part No14520MBB013 PriceÂ£32.00
doesnt say what other models it fits.

http://www.cmsnl.com/honda-vtr1000f-sup ... E++04.html
is the honda fiche showing all the camchain parts and part numbers - note the cct (item 4) shows the earlier part superceded by the part number above, stocked by silvers.
is this an uprated cct that eliminates the breakage issue?

That should be illegal putting that picture up on this forum, it's like putting a picture up of the Michael Jackson on a wonders of plastic surgery website..

matt1966 · Post by **matt1966** » Wed Apr 14, 2010 6:05 pm

Hi all
I ordered mine from Overstock on the 31st had an email yesterday from Gary saying he has sent them and gave me tracking no. Will let you know when they turn un.
Matt.

tony.mon · Post by **tony.mon** » Wed Apr 14, 2010 8:11 pm

bazza696 wrote:
That should be illegal putting that picture up on this forum, it's like putting a picture up of the Michael Jackson on a wonders of plastic surgery website..

Dunno, they seem to be doing a wonderful job of raising tension.....

VTR1000.ORG

where to order ape cct

where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct

Re: where to order ape cct