WORKSHOP DAY.

Snoogle · Post by **Snoogle** » Mon Mar 07, 2011 11:15 am

Might be a bit difficult.....theres no tank and no lights lol I'd deffo wanna come to the next one though!!

(if there is one)

Told my spray guy to pull his finger out this morning after I saw the sun out!!!

tony.mon · Post by **tony.mon** » Mon Mar 07, 2011 9:34 pm

Fair enough.
Just send the girl in your avatar piccy instead......

Snoogle · Post by **Snoogle** » Mon Mar 07, 2011 9:54 pm

Are you sure?

She looks like this......

tony.mon · Post by **tony.mon** » Tue Mar 08, 2011 6:21 pm

She any good with spanners?

Jonesey · Post by **Jonesey** » Tue Mar 08, 2011 11:52 pm

Did'nt know Mick Hucknall was still about.

tony.mon · Post by **tony.mon** » Sat Mar 12, 2011 10:53 am

Alright, time for a last call for people who want to come along next Saturday, the 19th March, to the workshop day at my house in Sevenoaks, Kent, about 10 mins from J3 on the M25.

So far we have:
Bazza696 (the Man for CCT's)
Jonesy (the Man for brakes
Darknomad
Alec
Elric
Robwestwick
Parkergb6
Blob748
Yeti
Styler4077

If you want to come along to join in, get some help, work on your own bike, or just have a social chat, see a few other people's bikes, a bbq and a rideout, PM me and I'll give you the address and details.

For those on the list above, it would be helpful if you would copy and paste the names list (use the "Quote" button) into a new message and list the jobs we will be tackling.

We'll have enough cover if it's raining.

All welcome, as ever.
Tony

alec · Post by **alec** » Sat Mar 12, 2011 11:04 am

tony.mon wrote:Alright, time for a last call for people who want to come along next Saturday, the 19th March, to the workshop day at my house in Sevenoaks, Kent, about 10 mins from J3 on the M25.

So far we have:
Bazza696 (the Man for CCT's)
Jonesy (the Man for brakes
Darknomad
Alec carb balancing & throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit valves without removing carbs.
Elric
Robwestwick
Parkergb6
Blob748
Yeti
Styler4077

If you want to come along to join in, get some help, work on your own bike, or just have a social chat, see a few other people's bikes, a bbq and a rideout, PM me and I'll give you the address and details.

For those on the list above, it would be helpful if you would copy and paste the names list (use the "Quote" button) into a new message and list the jobs we will be tackling.

We'll have enough cover if it's raining.

All welcome, as ever.
Tony

Wicky · Post by **Wicky** » Sat Mar 12, 2011 11:12 am

alec wrote:
tony.mon wrote:Alright, time for a last call for people who want to come along next Saturday, the 19th March, to the workshop day at my house in Sevenoaks, Kent, about 10 mins from J3 on the M25.

So far we have:
Bazza696 (the Man for CCT's)
Jonesy (the Man for brakes
Darknomad
Alec carb balancing & throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit valves without removing carbs.
Elric
Robwestwick
Parkergb6
Blob748
Yeti
Styler4077
Wicky (front pot carb balance insert inserting - small hands required)

If you want to come along to join in, get some help, work on your own bike, or just have a social chat, see a few other people's bikes, a bbq and a rideout, PM me and I'll give you the address and details.

For those on the list above, it would be helpful if you would copy and paste the names list (use the "Quote" button) into a new message and list the jobs we will be tackling.

We'll have enough cover if it's raining.

All welcome, as ever.
Tony

Darknomad · Post by **Darknomad** » Sat Mar 12, 2011 6:06 pm

Wicky wrote:
alec wrote:
tony.mon wrote:Alright, time for a last call for people who want to come along next Saturday, the 19th March, to the workshop day at my house in Sevenoaks, Kent, about 10 mins from J3 on the M25.

So far we have:
Bazza696 (the Man for CCT's)
Jonesy (the Man for brakes
Darknomad manual ccts, carb balance, forks if i get springs, shims if im lucky on the day to have right shims from a local shop or tone
Alec carb balancing & throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit valves without removing carbs.
Elric
Robwestwick
Parkergb6
Blob748
Yeti
Styler4077
Wicky (front pot carb balance insert inserting - small hands required)

If you want to come along to join in, get some help, work on your own bike, or just have a social chat, see a few other people's bikes, a bbq and a rideout, PM me and I'll give you the address and details.

For those on the list above, it would be helpful if you would copy and paste the names list (use the "Quote" button) into a new message and list the jobs we will be tackling.

We'll have enough cover if it's raining.

All welcome, as ever.
Tony

benny hedges · Post by **benny hedges** » Sat Mar 12, 2011 7:22 pm

i'll post my box of shims off to tony's in time.... swaps for the ones you take out - but mark the size on them pls & dont fkin mix them all up!!

Darknomad · Post by **Darknomad** » Sat Mar 12, 2011 8:02 pm

Jonesey · Post by **Jonesey** » Sat Mar 12, 2011 8:20 pm

alec wrote:
tony.mon wrote:
Alright, time for a last call for people who want to come along next Saturday, the 19th March, to the workshop day at my house in Sevenoaks, Kent, about 10 mins from J3 on the M25.

So far we have:
Bazza696 (the Man for CCT's)
Jonesy (BRAKES. Any and all aspects thereof, full caliper strips etc.) Be glad to help.
Darknomad
Alec carb balancing & throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit valves without removing carbs.
Elric
Robwestwick
Parkergb6
Blob748
Yeti (making the tea)
Styler4077
Wicky (front pot carb balance insert inserting - small hands required)

If you want to come along to join in, get some help, work on your own bike, or just have a social chat, see a few other people's bikes, a bbq and a rideout, PM me and I'll give you the address and details.

For those on the list above, it would be helpful if you would copy and paste the names list (use the "Quote" button) into a new message and list the jobs we will be tackling.

We'll have enough cover if it's raining.

All welcome, as ever.
Tony

Darknomad · Post by **Darknomad** » Sat Mar 12, 2011 9:34 pm

Where did my worklist go lol

tony.mon · Post by **tony.mon** » Sun Mar 13, 2011 1:03 am

So far we have:
Bazza696 (the Man for CCT's- some spare modified manual ones will be available on the day)
Jonesy (the Man for BRAKES. Any and all aspects thereof, full caliper strips etc.) Be glad to help.
Darknomad- manual ccts fitted and timed, carb balance, forks if i get springs, and valve shims if im lucky on the day to have right shims from a local shop or Tony .Mon

Alec- carb balancing & QA throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit carb balancer take-offs without removing carbs (small hands!)
Elric
Robwestwick
Parkergb6
Blob748
Yeti Tea making (wait 'til you see the hi-tech kettle!)
Styler4077
Wicky (front pot carb balance insert inserting - small hands required)
Matinik46
Macv2 -just joining in, and watching
+If I get time: fitting uprated master cylinder on my yellow one, and sorting starting prob with spare (RED) storm....Tony
I

elric · Post by **elric** » Sun Mar 13, 2011 9:49 pm

So far we have:
Bazza696 (the Man for CCT's- some spare modified manual ones will be available on the day)
Jonesy (the Man for BRAKES. Any and all aspects thereof, full caliper strips etc.) Be glad to help.
Darknomad- manual ccts fitted and timed, carb balance, forks if i get springs, and valve shims if im lucky on the day to have right shims from a local shop or Tony .Mon
Alec- carb balancing & QA throttle mod (i have a pot from a 35mm film) just a general check over if poss please.i'll fit carb balancer take-offs without removing carbs (small hands!)
Elric - Making sure Yeti is working to the right specifications and tolerances.
Robwestwick
Parkergb6
Blob748
Yeti Tea making (wait 'til you see the hi-tech kettle!)
Styler4077
Wicky (front pot carb balance insert inserting - small hands required)
Matinik46
Macv2 -just joining in, and watching
+If I get time: fitting uprated master cylinder on my yellow one, and sorting starting prob with spare (RED) storm....Tony
I

VTR1000.ORG

WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.

Re: WORKSHOP DAY.