Indicators stopped working!!

Need advice on which oil to use or which tyre best suits you? Share your topic and get help here.
Post Reply
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Indicators stopped working!!

Post by Griff1977 »

Hi guys. Hope nobody has suffered / will suffer too much by the floods!? Whilst riding for 4 hrs yesterday my indis stopped functioning! They would work every now and again but didn't work for the last hour of journey. I've been in the wind and rain over the last few days so could be that but not sure where to start.

Any body heard of this problem before with theirs? Not ideal changing lanes etc with no indicators!

Regards and may I be the first to wish all on the forum Happy Christmas!! Ha! Griff.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
User avatar
lloydie
Posts: 20928
Joined: Mon Jan 17, 2011 11:16 pm
Location: In the garage somewhere in Coventry

Re: Indicators stopped working!!

Post by lloydie »

bar humbug :Banned:
spray some wd40 in the switch gear this will help if not fit it :!:
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Indicators stopped working!!

Post by Griff1977 »

Lloydie. Ta for that. It's been drying out in garage (apart from me washing it today, twas filthy) for 24 hrs. I've just sprayed WD40 into indi switch but no joy. The, what I think must be the indi relay, (right hand side, behind R/R) makes an erratic series of clicks when I select L or R, but with no lights lighting up.

I wonder if a problem is causing the relay to click like this and not light the indies or the relay is at fault?

Mmmm. Oh well, soon be Christmas! Griff.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
User avatar
VTRDark
Posts: 20010
Joined: Sun Mar 18, 2012 9:24 pm

Re: Indicators stopped working!!

Post by VTRDark »

I would leave it for a few days to dry out, I suspect water has probably got in somewhere with the amount of rain over the last few days :eek2 . WD will help dissipate any water but too much will add to the problem. But if you getting an erratic clicking sound from the relay it's sounds dodgy. Maybe water in the switchgear could cause this but I would not have thought so.You could check the relay, I just can't see how water will get up behind the fairing to soak that area, so if it's not the switchgear causing it, then it's probably faulty. It may be worth unplugging it and reconnecting to see what happens.Also give the relay a tap, it's like something inside the relay has got stuck and jamming it causing erratic clicking. It could be a spring or something inside jamming up.

(:-})
==============================Enter the Darkside
tony.mon
Posts: 16288
Joined: Wed Jul 25, 2007 10:46 pm
Location: Norf Kent

Re: Indicators stopped working!!

Post by tony.mon »

cybercarl wrote:.Also give the relay a tap,

(:-})
Then just open the tap, and .......
It's not falling off, it's an upgrade opportunity.
User avatar
Griff1977
Posts: 387
Joined: Tue Jul 19, 2011 10:43 am
Location: Caistor, Lincolnshire

Re: Indicators stopped working!!

Post by Griff1977 »

I'm an idiot! I bought a new indi relay from David silvers, although I saw one on eBay! £40 del.

Arrived. Still not working.

Opened up switch and used hair dryer in it and hey presto all works!!!

Live and learn! Griff.
KriegerCCTs,HEL oil lines,+4 advancer,+1/-1 sprockets,6mm spacer,CBR1k Sidestand,'07 R1 R/R,HyperPro springs F&R,Pipe Werx SL Carbons,Oxford sports hot grips,Mori style belly
Immediate plans:Clean it!
Post Reply