TPS thread

[darkember]

Could someone point me in the direction of the TPS thread, cannot seem to find it anywhere.

Thanks

[Wicky]

KB Article #4 - Throttle Position Sensor > http://www.superhawkforum.com

[darkember]

KB Article #4 - Throttle Position Sensor > http://www.superhawkforum.com

Thanks Wicky. I thought we had a procedure set out on this forum

[VTRDark]

Or there is this on how to adjust the TPS http://www.vtr1000.org/phpBB3/viewtopic ... or#p222504

Or bits of info here http://www.vtr1000.org/phpBB3/viewtopic.php?f=9&t=25822

and this is what it does.

the TPS Is Attached to the butterfly flap on the carbs which works via the throttle, so the reading changes as you open the throttle up and the TPS sends a reading to the ECU where it works out whether to advance or retard the ignition timing according to speed and revs.

(:-})

[darkember]

Great info there. I will need to check if my 02 model uses this style of TPS first. BTW what size security torque hex did you use?? Also if you adjust the TPS unit whilst still on the cabs which direction should it be moved??

[VTRDark]

BTW what size security torque hex did you use??

LOL, I really don't know without looking. I just bought a small kit, they're cheap enough. A cheap kit probably costs as much as buying one.
http://www.ebay.co.uk/itm/33PC-SECURIT ... 51acb8f201

http://www.ebay.co.uk/itm/TAMPERPROOF-T ... 2ebcc40a88

I will need to check if my 02 model uses this style of TPS first

Should be the same.

(:-})