List of required parts...

[Ckennedy]

Thinking more on my Euro trip I have realised I need to make some adjustments to the bike and acquire some more bits before I go. In order of urgency which I need:

1: brighter indicators (original storm or after market, front and rear) May have some sorted but pipe up anyway. Would like flush mounts for front
2: Rentect luggage rack. I have the mount bars just no grab rail with luggage rack.
3. Headlight beam adjuster lens.

Could do with them ASAP. Planned trip in 2nd week of Sept.

I did have other things in mind but now I have come to list them I have forgot all of them Will add them if I remember.

Thanks in advance

Chris

[lloydie]

Baby wipes is a must

[Flatline]

Renntec in the ebay thread

[lloydie]

Remember you can borrow my rack if needed

[Wicky]

Headlight beam adjuster lens.

There are adjusters for up/down & left/right on the back of the headlight.

Hope you've got spare wine carrying capacity for the return trip

[VTRDark]

And don't bring back any immigrants.

[youtube][/youtube]

(:-})

[lloydie]

Garry Garry ! That's one of my favourite episodes

[Ckennedy]

Headlight beam adjuster lens.

There are adjusters for up/down & left/right on the back of the headlight.

Hope you've got spare wine carrying capacity for the return trip

Do I just need to change it to point left then? or is there more to it?

[Hairy biker]

Headlight beam adjuster lens.

There are adjusters for up/down & left/right on the back of the headlight.

Hope you've got spare wine carrying capacity for the return trip

Do I just need to change it to point left then? or is there more to it?

You need to mask off the 'kick up' on the beam pattern, beam benders are the easy option, you can do it with gaffer tape but it can be a bit of a faf about,you'll be able to see the beam pattern against a wall or garage door, then then you just move the beam bender/gaffer tape around until the kick up disappears and your left with a flatline,its much easier to take it to a testing station and use their beam tester to do it.

[Wicky]

Upper left adjuster - Up & Down, Lower right adjuster - Left & right

[Ckennedy]

Think a lens is an easier option. Anyone got one?

[Wicky]

10mm socket , few twizzles & viola beam direction adjusted.

Think a lens is an easier option. Anyone got one?

[lloydie]

It's easy I will show you later .

[VTRDark]

Just do as Hairy suggested. All that is needed is a triangular shaped bit of gaffa tape or something to block the beam.
http://www.brick-yard.co.uk/vehiclespec ... adlamp.htm

I would juts stick it on so it looks the part. Who gives a sh1t about the beam. If it Blinds the French... well.. wombles um.

http://www.motoring-into-europe.co.uk/faq.html

http://www.halfords.com/webapp/wcs/stor ... yId_165458

(:-})

[tony.mon]

Baby oil is a must

Yes, and sun tan oil as the cheeks escaping from the speedos on the Riviera beach will go pink in minutes......