Project bitsa..
Re: Project bitsa..
But fitting nice cnc goodies to a blue storm is like the motogp teams testing their new parts on Harleys!
Jamie 

Re: Project bitsa..
The alternative is to use an indecisive silver, no black, no wrapped in sticky back plastic piece of tat!! Back in your box or the nipple cripple will be reciprocated. 

Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Re: Project bitsa..
It's cause we don't want you to come back this time 
Sent from my GT-I9505 using Tapatalk

Sent from my GT-I9505 using Tapatalk
Slowly approaching the more bikes than birthdays achievement
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Project bitsa..
Two pages and 18 replays and not a single build post . This forum has gone to pot , you lot should be ashamed of your selves 
Will that huge chunk of carbon be making it's way into this build ?

Will that huge chunk of carbon be making it's way into this build ?
Re: Project bitsa..
I'd forgotten that huge chunk of carbon; I've spent all weekend making one out of many layers of thinner bits...lloydie wrote:Two pages and 18 replays and not a single build post . This forum has gone to pot , you lot should be ashamed of your selves
Will that huge chunk of carbon be making it's way into this build ?

It's not falling off, it's an upgrade opportunity.
Re: Project bitsa..
Fantastic dude, I see you've updated project bitsa! My jaw is currently on the floor
The frame infills look fantastic, as do the linkages with corse machining, this is really going to be something else


The frame infills look fantastic, as do the linkages with corse machining, this is really going to be something else


Jamie 

Re: Project bitsa..
Looking mighty fine Mark 

Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
F3, 954 USD front, K Tech springs, Braced swinger, Ohlins shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, Mori pipe's [colour]
Re: Project bitsa..
This will be a bike build on a biblical scale, the beast will be awoken.
Lovely bit of machining Mark right down to the directional flow of the marks. Attention to detail
(:-})

Lovely bit of machining Mark right down to the directional flow of the marks. Attention to detail

(:-})
==============================Enter the Darkside
- lloydie
- Posts: 20928
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Project bitsa..
if you put any tat on that i will
you !!!
looks like a well thought out build and with great machined parts keep it up

looks like a well thought out build and with great machined parts keep it up

- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm
Re: Project bitsa..
I've got my hands on some of that so called anodised tat, trust me, nothing about marks bike will be tat, it's looking good mark, keep up the good work....
Any left over ti goodies you can kindly send to me...

Any left over ti goodies you can kindly send to me...

HEY YOU GUYS!!!!!!
Re: Project bitsa..
OMFG
can't wait to see this beast evolve
. Got a twinge just looking at the frame and swinger 



SH#T HAPPENS!!!!!!!!
Re: Project bitsa..
Nice start, let's see where it goes...


It's not falling off, it's an upgrade opportunity.
Re: Project bitsa..
Calling this a bitsa is a serious understatement, this is going to be a serious special.
I can't wait for the next instalment
I can't wait for the next instalment
AMcQ
- agentpineapple
- Posts: 15124
- Joined: Sat Mar 26, 2011 9:16 pm