Hi new in to the forum
Does anybody know. Thermostat dial on clocks is not registering does this have its own fuse?? Or could there be another reason why it's not working.
Cheers sponge
Workshop
- lloydie
- Posts: 20923
- Joined: Mon Jan 17, 2011 11:16 pm
- Location: In the garage somewhere in Coventry
Re: Workshop
http://www.bike-parts-honda.com/pieces- ... STORM.html
Number 15
See if the wire is attached as it is Easley nocked off .
Hello and welcome
Number 15
See if the wire is attached as it is Easley nocked off .
Hello and welcome
Re: Workshop
Welcome to the club Sponge
Carpe diem, quam minimum credula postero
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
F3, 954 USD front, K Tech springs, Braced swinger, Penske shock, Six spoke Mockesini wheels, Harris rearsets, QaT, Flywheel diet!, A&L stacks, stick coils, K&N, FP Ti jets, lashings of Ti & CF
Re: Workshop
You also may want to check the sensor itself and wiring is all in order too. If you have a multimeter there are some tests you can do. Page 19-14 in the Honda workshop manual.Number 15
See if the wire is attached as it is Easley nocked of
You can download a PDF Honda workshop manual from the following:
http://www.vtr1000.org/phpBB3/viewtopic ... 31&t=18025
Welcome onboard
(:-})
==============================Enter the Darkside