Ebay Finds (unusal/cheap/rare/or just good value)

[KermitLeFrog]

Interesting to see what they looked like when they were new. But... I suspect they didn't look that good!

[Watty]

Pretty dam clean. Big money but can't be many on showroom condition.


http://m.ebay.co.uk/itm/Honda-VTR-Fires ... nav=SEARCH

That must be Watty's bike

All joking aside, what a find

Chris.

Mines done less miles

[Watty]

probably too embarrassed to be seen out on a teal bike, hence the low mileage and showroom condition

Richard

[freeridenick]

There must be something seriously wrong with this http://www.ebay.co.uk/itm/201497246576? ... EBIDX%3AIT

Looks like it's been stood for a while and the silver pinstriping looks like tape, but surely the trick bits are worth the asking price alone.

[tony.mon]

Cheap Yoshimura shorties and link pipes for SP.....
http://www.ebay.co.uk/itm/Yoshimura-Car ... SwYIhWjvWq

[sirch345]

JE piston kits in the UK. Unsure if that is the most cost effective way to get your hands on some though:-
http://www.ebay.co.uk/itm/HONDA-VTR1000 ... lqZBCoQ_XA

Chris.

[tony.mon]

JE piston kits in the UK. Unsure if that is the most cost effective way to get your hands on some though:-
http://www.ebay.co.uk/itm/HONDA-VTR1000 ... lqZBCoQ_XA

Chris.

It's not, Chris- you can buy them in the States and even after paying import duty they come down to around £260, depending on the exchange rate.

[Stephan]

JE piston kits in the UK. Unsure if that is the most cost effective way to get your hands on some though:-
http://www.ebay.co.uk/itm/HONDA-VTR1000 ... lqZBCoQ_XA

Chris.

It's not, Chris- you can buy them in the States and even after paying import duty they come down to around £260, depending on the exchange rate.

Our czech site specialized for us items advertise them about 210 pounds, but sometimes reality is that shop is not actual. At the end, as there is no payment done with order, it can be worth try. Link is for one piece.
http://www.motops.cz/pist-1x-pistni-sad ... 001-11-51/

[Stephan]

I would prefer custom made CP pistons over JE. Mine are 98,5 mm I assume there will be no problem to make 98 mm. Price is about 450 usd plus shipping and taxes (use shipito.com or similar), but including rings.

[tony.mon]

If you're buying oversize, buying rings is difficult. Last time I had to but oversize they had to come in from Japan, and I had to wait three weeks for a batch to be ready

[Stephan]

Os honda pistons are not available, only new old stock. CP comes with rings, only problem for me was to find shop willing to do new bore for cylinders in crankcase.

[sirch345]

JE piston kits in the UK. Unsure if that is the most cost effective way to get your hands on some though:-
http://www.ebay.co.uk/itm/HONDA-VTR1000 ... lqZBCoQ_XA

Chris.

It's not, Chris- you can buy them in the States and even after paying import duty they come down to around £260, depending on the exchange rate.

Cheers Tony, I did wonder,

Chris.

[StormyRob]

http://m.ebay.co.uk/itm/Carbon-Fibre-Ra ... nav=SEARCH

Cans and link pipes at £100 at the minute.

Can't tell what make they are. Closest I found is



Blue One

[Sir-knob-head]

JE piston kits in the UK. Unsure if that is the most cost effective way to get your hands on some though:-
http://www.ebay.co.uk/itm/HONDA-VTR1000 ... lqZBCoQ_XA

Chris.

they're 50 quid cheaper on the website for the same company

[Sir-knob-head]

http://tts-performance-parts.myshopify. ... -1997-2001