under tank pipe routing

[agentpineapple]

not sure if this is different between the early and late models, the smaller diameter pipe that run into the underside of the tank, I assume it runs towards the front of the bike and exits near the oil filter like a lot of the other pipes. I haven't been able to find any pictures of how's it's routed, can anyone advise.
from the little I know, it runs across the top of the rear cam cover towards the nearside off the bike, so it'll tuck inside the frame, but at which point exactly?

[fabiostar]

mine runs over the cam cover to the frame then as you say down to the nearside of the oil filter.

[Cadbury64]

not sure if this is different between the early and late models, the smaller diameter pipe that run into the underside of the tank, I assume it runs towards the front of the bike and exits near the oil filter like a lot of the other pipes. I haven't been able to find any pictures of how's it's routed, can anyone advise.
from the little I know, it runs across the top of the rear cam cover towards the nearside off the bike, so it'll tuck inside the frame, but at which point exactly?

RTFM*





* read the freaking manual! Section 1-18

[agentpineapple]

not sure if this is different between the early and late models, the smaller diameter pipe that run into the underside of the tank, I assume it runs towards the front of the bike and exits near the oil filter like a lot of the other pipes. I haven't been able to find any pictures of how's it's routed, can anyone advise.
from the little I know, it runs across the top of the rear cam cover towards the nearside off the bike, so it'll tuck inside the frame, but at which point exactly?

RTFM*





* read the freaking manual! Section 1-18

having looked online at different websites and microfiches, I wasn't able to find the info I required, hence asking the question I did. i'd like to thank you for pointing out that the info I wanted was in the manual. although it's on page 1-21 not 1-18. I also didn't much like the way you replied to my humble question. so i'll leave it like this.

WDYFO*





* why don't you f..k off

[carmanbikes]

Hiya AP is it the pipe that has the reducer on it where it fits on the tank

[agentpineapple]

Hiya AP is it the pipe that has the reducer on it where it fits on the tank

yes mate, I had a go this afternoon, but I seem to have a lot of extra pipe left over, so i'm wondering if it works it's way around the engine and back, a kind member has offered to ride down at the weekend so I can see the routing on his bike....

[carmanbikes]

Hiya AP is it the pipe that has the reducer on it where it fits on the tank

yes mate, I had a go this afternoon, but I seem to have a lot of extra pipe left over, so i'm wondering if it works it's way around the engine and back, a kind member has offered to ride down at the weekend so I can see the routing on his bike....

Just bee out and checked m8 and mine just runs down the inside the frame and then meets a bundle more which are cable tied together

[agentpineapple]

cheers lee...........

[Cadbury64]

not sure if this is different between the early and late models, the smaller diameter pipe that run into the underside of the tank, I assume it runs towards the front of the bike and exits near the oil filter like a lot of the other pipes. I haven't been able to find any pictures of how's it's routed, can anyone advise.
from the little I know, it runs across the top of the rear cam cover towards the nearside off the bike, so it'll tuck inside the frame, but at which point exactly?

RTFM*

* read the freaking manual! Section 1-18

having looked online at different websites and microfiches, I wasn't able to find the info I required, hence asking the question I did. i'd like to thank you for pointing out that the info I wanted was in the manual. although it's on page 1-21 not 1-18. I also didn't much like the way you replied to my humble question. so i'll leave it like this.

WDYFO*

* why don't you f..k off

You're welcome, I'm glad I was able to point you in the right direction to find the diagram that you needed. Sorry I was three pages out, and that you have taken umbrage at my antipodean humour.

[youtube][/youtube]

[NZSpokes]

not sure if this is different between the early and late models, the smaller diameter pipe that run into the underside of the tank, I assume it runs towards the front of the bike and exits near the oil filter like a lot of the other pipes. I haven't been able to find any pictures of how's it's routed, can anyone advise.
from the little I know, it runs across the top of the rear cam cover towards the nearside off the bike, so it'll tuck inside the frame, but at which point exactly?

I ran mine out by the rear CCT as when it was up the front it filled up with water and stalled the bike. No problems since.

[agentpineapple]

You're welcome, I'm glad I was able to point you in the right direction to find the diagram that you needed. Sorry I was three pages out, and that you have taken umbrage at my antipodean humour.

[youtube][/youtube]

sorry fella, I was having a bad day, if you'd attached one of these.... I would have laughed it off. but no harm done.