Block connector R/R

[mjvw]

Have subframe off, so checking wiring have notice the 3 yellow wires R/R connector block under seat in plastic cover are a little scorched ok at R/R end, would like to cut back the scorched wire and fit a new connector block. After reading most of the R/R posts the 3 yellow wires can be connected anyway?
But what block connector would this one work?
https://kojaycat.co.uk/epages/950000457 ... 3W-CNA-WHT

Everything is working as expected charging ok, it/s 2002 f2 finned type R/R.

So many questions just wish I had the answers, but this forum always has.

[MacV2]

Yeah scrap it & fit a MOSSFET R/R...

[sirch345]

A few links you may or may not have already seen:

http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482

https://www.superhawkforum.com/forums/k ... how-25117/

Chris.

[mjvw]

A few links you may or may not have already seen:

http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482

https://www.superhawkforum.com/forums/k ... how-25117/

Chris.

Now thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?

[MacV2]

A few links you may or may not have already seen:

http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482

https://www.superhawkforum.com/forums/k ... how-25117/

Chris.

Now thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?

Yes 3 yella any order.. Red & green need to be fitted to the correct terminals so make a note of which way they fit...

[mjvw]

Cheers much appreciated just going to purchase new connector bock new for now new R/R later.

[sirch345]

A few links you may or may not have already seen:

http://www.vtr1000.org/phpBB3/viewtopic ... 84#p351482

https://www.superhawkforum.com/forums/k ... how-25117/

Chris.

Now thats a good read sirch345 so i will change to a more rebust R/R in the mean time as in my OP can the 3 yellow wires be but anyway round in a new block connector and is the connector ok i linked in the OP?

As Mac says, anyway around for those three yellow wires from the alternator is fine.
As for the new connector block, it states it's meant for alternator use so I'm guessing it should be fine, plus it shows on Kojaycat's site one for a Fireblade using the same size terminals. You'll just need a crimping tool

Chris.

[mjvw]

Thanks have ordered from another supplier plus some petrol pipe clips. Seemed to be a better price FYI

https://www.bikerstoolbox.co.uk/

.

[sirch345]

Thanks have ordered from another supplier plus some petrol pipe clips. Seemed to be a better price FYI

https://www.bikerstoolbox.co.uk/

.

I'll have a look at that, cheers for the link

Chris.