VTR1000.ORG

KarlosVTR · Post by **KarlosVTR** » Thu Mar 06, 2008 9:02 am

i have to tell you this for your information

GFK is to german what GRP is to english

GFK-MOTIELE or whatever is the company name

just for your information

Post by **sirch345** » Thu Mar 06, 2008 11:15 am

Iirc Kitch is your man to answer that question Mike

Wasn't it something to do with no mounting place for the number plate

Chris.

PS. There's a pic in this link of said item (Rincewind 7th post) plus other info on it

http://www.vtr1000.org/phpBB2/viewtopic ... sc&start=0

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 11:59 am

Got one of those fitted to mine,Mike.
The fit is OK & looks well enough when painted,as Chris said ,the back section is only deep enough for a reflector,i mounted the no.plate on a tail tidy,& moved the seat lock underneath.
Cheers
Steve

LotusSevenMan · Post by **LotusSevenMan** » Thu Mar 06, 2008 1:09 pm

Should that be:-

Vorsprung SIRCH technique Mr Chris S ?

Post by **kevg** » Thu Mar 06, 2008 2:11 pm

i got one of the trays from germany off ebay, it wasn't long enough to reach between the two bodywork screws on the underside of the tail unit and the tail light, it left about a 3/4 inch gap when lined up with the screws.

it should still be knocking around the garage somewhere, its unpainted and i think i drilled the holes in it, there should be more posts about them from Kitch and me. i might have even put up a pic or two at the time, they will be from this time last year when i had my bike in bits.

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 3:54 pm

Took some this morning,i'll try & post them tonight when i finish work,couldn't give us a few pointers how to get them on here could you.
Cheers
Steve

Post by **sirch345** » Thu Mar 06, 2008 4:04 pm

stevevtr1 wrote:Took some this morning,i'll try & post them tonight when i finish work,couldn't give us a few pointers how to get them on here could you.
Cheers
Steve

This link should help you Steve

http://www.vtr1000.org/phpBB2/viewtopic.php?t=8866

Chris.

Kitch · Post by **Kitch** » Thu Mar 06, 2008 5:29 pm

Yeah, the one I got was never ever going to fit. It was way too short.

TBH, even modifying it, I doubt it will look right.

I'd honestly just go with a powerbronze one.

veeteearr_HRC · Post by **veeteearr_HRC** » Thu Mar 06, 2008 7:06 pm

got mine off moto_tuning_parts on fleebay , fit like a glove . although you have to use a platemate , and relocate the hole for the seat release lock .

easy done tho

. cost 25 sponds and arrived fairly quick to say it came from portugal.

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 11:35 pm

FirestormMike wrote:cheers for the replies, think I'll purchase one and make a plate bracket to suit.
do you have a fitted pic Steve ? and cheers for the link Chris, Rincewind's looks ok.

OK Mike ,If this works it'll be a miracle

[imghttp://www.vtr1000.org/cpg/displayimage.php?album=4&pos=2]
Cheers
Steve[/img]

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 11:39 pm

Bo@@ox,wheres the pic.
Spent the last 90 mins to get this far,bloody computers.
Anyhow i did manage to get it in the gallery.
Cheers Steve

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 11:44 pm

Try again

stevevtr1 · Post by **stevevtr1** » Thu Mar 06, 2008 11:45 pm

cupasoop · Post by **cupasoop** » Fri Mar 07, 2008 7:09 am

I should be getting a wage for this

Kitch · Post by **Kitch** » Fri Mar 07, 2008 11:52 am

This is the GFK Moto Teile one I got:

http://www.vtr1000.org/phpBB2/viewtopic ... =undertray